Compare commits

..
Author SHA1 Message Date
patternihaandClaude Opus 5.5 5996286a89 XDRIVE transport: Retry "local" Get on Windows sharing violations
On Windows, os.Rename (MoveFileEx) opens the file with DELETE access,
renames it, then closes that handle. For a moment the new name is
already listed while the handle is still open, and os.ReadFile, which
shares only reading and writing, fails with ERROR_SHARING_VIOLATION.
The WAL reader lists a segment as soon as Put renames it into place,
and any Get error other than "not found" ends the stream:

  xdrive_test.go:143: ReadFull: transport/internet/xdrive: failed to read streams/<id>/c2s/000000001.seg > open ...\000000001.seg: The process cannot access the file because it is being used by another process.

Measured on Windows 11 (Defender real-time protection on, 22 logical
CPUs) with a reader that keeps opening the new name during the rename:
98.6% of 5,001 renames hit the error, every failed open started before
MoveFileEx returned, and none failed with FILE_SHARE_DELETE added to
the open. The window is about 0.3 ms when idle, but 10 ms median and
up to 124 ms with all CPUs busy, which is why it shows up in full
`go test ./...` runs. Under such load (22 busy-loop processes) the
unfixed TestMultiSegmentTransfer, TestRoundTrip, TestInterleaved and
TestCloseEOF failed 4 of 60 runs; with this change, 0 of 120.

Get now retries os.ReadFile on ERROR_SHARING_VIOLATION for up to 2
seconds, as cmd/internal/robustio does, backing off from 1 ms to 100 ms
and returning early once ctx is done. Other platforms still call
os.ReadFile once. TestLocalSharingViolation holds a segment open with
DELETE access, as MoveFileEx does, and checks that Get waits for it.

Opening with FILE_SHARE_DELETE would avoid the conflict, but os.Open
cannot set the share mode, and a raw CreateFile would lose its long
path handling. Put's rename is unchanged: no rename failed in about
63,000 renames during these measurements, idle or under load.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 12:23:24 +03:30
dependabot[bot]GitHubdependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
7c8dbcb4bb Bump google.golang.org/grpc from 1.84.0 to 1.85.0 (#7311)
Bumps [google.golang.org/grpc](https://github.com/grpc/grpc-go) from 1.84.0 to 1.85.0.
- [Release notes](https://github.com/grpc/grpc-go/releases)
- [Commits](https://github.com/grpc/grpc-go/compare/v1.84.0...v1.85.0)

---
updated-dependencies:
- dependency-name: google.golang.org/grpc
  dependency-version: 1.85.0
  dependency-type: direct:production
  update-type: version-update:semver-minor
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2026-11-02 02:03:49 +00:00
dependabot[bot]GitHubdependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
8ab161a2b0 Bump golang.org/x/net from 0.61.0 to 0.62.0 (#7312)
Bumps [golang.org/x/net](https://github.com/golang/net) from 0.61.0 to 0.62.0.
- [Commits](https://github.com/golang/net/compare/v0.61.0...v0.62.0)

---
updated-dependencies:
- dependency-name: golang.org/x/net
  dependency-version: 0.62.0
  dependency-type: direct:production
  update-type: version-update:semver-minor
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2026-11-02 02:03:35 +00:00
RPRXandGitHub a4a3dff5b2 Xray-core v26.10.31
Sponsor & Donation & NFTs: https://github.com/XTLS/Xray-core/issues/3668
Project X Channel: https://t.me/projectXtls

Announcement of NFTs by Project X: https://github.com/XTLS/Xray-core/discussions/3633
Project X NFT: https://opensea.io/assets/ethereum/0x5ee362866001613093361eb8569d59c4141b76d1/1

VLESS Post-Quantum Encryption: https://github.com/XTLS/Xray-core/pull/5067
VLESS NFT: https://opensea.io/collection/vless

XHTTP: Beyond REALITY: https://github.com/XTLS/Xray-core/discussions/4113
REALITY NFT: https://opensea.io/assets/ethereum/0x5ee362866001613093361eb8569d59c4141b76d1/2
2026-10-31 13:20:19 +00:00
6cdd323ad8 TUN inbound's autoSystemWfpBlockLeak: Support "tcp/port" and "udp/port"; "dns" covers "tcp/853" and "udp/853" as well (#7288)
https://github.com/XTLS/Xray-core/pull/6853#issuecomment-6492838227
https://github.com/XTLS/Xray-core/pull/7288#issuecomment-6507229727
https://github.com/XTLS/Xray-core/pull/7288#issuecomment-6516762634

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 13:16:31 +00:00
316e07a538 XHTTP server: Add h2Params (#7295)
https://github.com/XTLS/Xray-core/pull/7282#issuecomment-6523157944
https://github.com/XTLS/Xray-core/pull/7295#issuecomment-6543501751

Closes https://github.com/XTLS/Xray-core/issues/6268

---------

Co-authored-by: pqhaz3925 <195911022+pqhaz3925@users.noreply.github.com>
2026-10-31 12:52:14 +00:00
MeowandRPRX 0c3402d778 Geodata: Support streaming gzip decompression when downloading assets (#7294)
https://github.com/XTLS/Xray-core/pull/7294#issuecomment-6542074150
2026-10-31 11:56:59 +00:00
bc7c895278 HTTP inbound: Forward short 100 Continue responses promptly (#7298)
https://github.com/XTLS/Xray-core/pull/7298#issuecomment-6542585254

---------

Co-authored-by: 风扇滑翔翼 <Fangliding.fshxy@outlook.com>
2026-10-31 11:29:02 +00:00
konstpicandRPRX e7a69fa85a XHTTP server: Accept OPTIONS as uplinkHTTPMethod (#7290)
https://github.com/XTLS/Xray-core/pull/7290#issuecomment-6505845186
2026-10-31 08:43:57 +00:00
9b8190f52c QUIC sniffer: Don't accept ClientHello with gaps in CRYPTO data (#7292)
https://github.com/XTLS/Xray-core/pull/7292#pullrequestreview-5712194488

---------

Co-authored-by: 风扇滑翔翼 <Fangliding.fshxy@outlook.com>
2026-10-31 08:31:30 +00:00
6ca6d8a693 Commands: Fix xray api bi balancer1 balancer2 (#7299)
https://github.com/XTLS/Xray-core/pull/7279#issuecomment-6468250523

---------

Co-authored-by: RPRX <63339210+RPRX@users.noreply.github.com>
2026-10-31 07:21:32 +00:00
风扇滑翔翼andGitHub d1140de273 Chore: Regenerate *.pb.go files (#7287)
https://github.com/XTLS/Xray-core/pull/7263#issuecomment-6464669635
2026-10-31 07:13:55 +00:00
风扇滑翔翼andGitHub 6ea0ab5d3a DefaultListener: Disable MPTCP by default (#7291)
Fixes https://github.com/XTLS/Xray-core/pull/7291#issuecomment-6540309985
2026-10-31 07:05:32 +00:00
RPRXandGitHub 0afec66085 Xray-core v26.10.29
Sponsor & Donation & NFTs: https://github.com/XTLS/Xray-core/issues/3668
Project X Channel: https://t.me/projectXtls

Announcement of NFTs by Project X: https://github.com/XTLS/Xray-core/discussions/3633
Project X NFT: https://opensea.io/assets/ethereum/0x5ee362866001613093361eb8569d59c4141b76d1/1

VLESS Post-Quantum Encryption: https://github.com/XTLS/Xray-core/pull/5067
VLESS NFT: https://opensea.io/collection/vless

XHTTP: Beyond REALITY: https://github.com/XTLS/Xray-core/discussions/4113
REALITY NFT: https://opensea.io/assets/ethereum/0x5ee362866001613093361eb8569d59c4141b76d1/2
2026-10-29 08:38:50 +00:00
55eecaed16 Config: Move inbound module initialization to the end (#7284)
Fixes https://github.com/XTLS/Xray-core/pull/7284#issuecomment-6491545028

---------

Co-authored-by: Copilot <copilot@github.com>
2026-10-29 08:34:16 +00:00
2dfee4b842 XDRIVE transport: Carry a Google Drive session in a ring of slots (#7217)
https://github.com/XTLS/Xray-core/pull/7217#issuecomment-6489554617

---------

Co-authored-by: Ahmad-2213 <106820058+Ahmad-2213@users.noreply.github.com>
2026-10-29 06:47:42 +00:00
Жора ЗмейкинandGitHub b4123b5748 XDRIVE transport: Add "s3" storage backend (#7231)
https://github.com/XTLS/Xray-core/pull/7231#issuecomment-6488077212
2026-10-29 04:44:41 +00:00
ec124ff9e0 WebSocket transport: Treat normal close frames as io.EOF (#7236)
Fixes https://github.com/XTLS/Xray-core/issues/7235#issuecomment-6353389899

---------

Co-authored-by: 风扇滑翔翼 <Fangliding.fshxy@outlook.com>
2026-10-29 03:42:11 +00:00
SolomonandGitHub 8a3c0cbf1d Sockopt: Fix swapped TCP keepalive idle and interval on Darwin (#7219)
https://github.com/XTLS/Xray-core/pull/7219#pullrequestreview-5691960668
2026-10-29 02:54:53 +00:00
78b5a6ec5c GitHub Action CI: Enforce stricter checks on generated protobuf files (#7263)
https://github.com/XTLS/Xray-core/pull/7263#issuecomment-6447862934
https://github.com/XTLS/Xray-core/pull/7263#issuecomment-6484719865
https://github.com/XTLS/Xray-core/pull/7263#issuecomment-6485805671

---------

Co-authored-by: Fangliding <Fangliding.fshxy@outlook.com>
2026-10-29 02:34:47 +00:00
5865e3ac3d DNS outbound: Keep hijacked A/AAAA replies within the buffer (#7225)
https://github.com/XTLS/Xray-core/pull/7225#pullrequestreview-5613859264

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: 风扇滑翔翼 <Fangliding.fshxy@outlook.com>
2026-10-29 00:42:19 +00:00
48f62b801a Geodata: Limit download size, file extensions, and update frequency (#7267)
https://github.com/XTLS/Xray-core/pull/7265#issuecomment-6464588139

---------

Co-authored-by: xqzr <34030394+xqzr@users.noreply.github.com>
2026-10-29 00:22:51 +00:00
MeowandGitHub 43c29f8eb1 Geodata: Update built-in generalized "private" IP ranges (#7249)
And https://github.com/XTLS/Xray-core/pull/7249#issuecomment-6483478811

https://github.com/XTLS/Xray-core/pull/7249#issuecomment-6391494484
https://github.com/XTLS/Xray-core/pull/7249#issuecomment-6483591550
2026-10-28 23:45:22 +00:00
MeowandGitHub 613d8147bb Direct/Freedom outbound: Warn about migrating fragment and noises to Finalmask (#7242)
https://github.com/XTLS/Xray-core/issues/7240#issuecomment-6361862358
2026-10-28 22:49:30 +00:00
38f090255c Commands: Fix xray api adrules c1.json c2.json (#7276)
https://github.com/XTLS/Xray-core/pull/7276#pullrequestreview-5680949792

---------

Co-authored-by: 风扇滑翔翼 <Fangliding.fshxy@outlook.com>
2026-10-28 21:59:27 +00:00
35a3121a83 File loader: Check file extensions without resolving symlinks (#7255)
https://github.com/XTLS/Xray-core/pull/7255#issuecomment-6481194940
https://github.com/XTLS/Xray-core/pull/7250#issuecomment-6398816842

Fixes https://github.com/XTLS/Xray-core/issues/7239#issuecomment-6356122816

---------

Co-authored-by: Eljees <3.14hell@gmail.com>
2026-10-28 21:59:03 +00:00
风扇滑翔翼andGitHub bca08ac080 Routing: Fix Linux IPv6 process (#7232)
Fixes https://github.com/XTLS/Xray-core/issues/7227
2026-10-28 20:49:08 +00:00
6a4274ab75 TUN inbound: autoOutboundsInterface should not set IP_BOUND_IF on IPv6 sockets on Darwin (mainly macOS) (#7230)
Fixes https://github.com/XTLS/Xray-core/issues/7228

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 20:34:40 +00:00
solodecodeandGitHub 229799a7a3 Direct/Freedom outbound: Fix blockDelay for DispatchLink() inbounds such as VLESS, Hysteria, etc. (#7238)
https://github.com/XTLS/Xray-core/pull/7238#pullrequestreview-5627787937
https://github.com/XTLS/Xray-core/pull/7238#issuecomment-6467092152
https://github.com/XTLS/Xray-core/pull/6060#issuecomment-4384511163
2026-10-28 11:02:55 +00:00
3071fbfa25 Sockopt: Handle single-family interface binding on Windows, including TUN inbound's autoOutboundsInterface (#7214)
And https://github.com/XTLS/Xray-core/pull/7214#issuecomment-6329118637

https://github.com/XTLS/Xray-core/pull/7201#issuecomment-6314453444

Fixes https://github.com/XTLS/Xray-core/issues/7160#issuecomment-6246944012

---------

Co-authored-by: patterniha <71074308+patterniha@users.noreply.github.com>
2026-10-28 10:15:58 +00:00
dependabot[bot]GitHubdependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
1576e79563 Bump github.com/pires/go-proxyproto from 0.15.0 to 0.16.0 (#7237)
Bumps [github.com/pires/go-proxyproto](https://github.com/pires/go-proxyproto) from 0.15.0 to 0.16.0.
- [Release notes](https://github.com/pires/go-proxyproto/releases)
- [Commits](https://github.com/pires/go-proxyproto/compare/v0.15.0...v0.16.0)

---
updated-dependencies:
- dependency-name: github.com/pires/go-proxyproto
  dependency-version: 0.16.0
  dependency-type: direct:production
  update-type: version-update:semver-minor
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2026-10-27 04:31:46 +00:00
dependabot[bot]GitHubdependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
67e7f82ca1 Bump docker/login-action from 4.6.0 to 4.7.0 (#7257)
Bumps [docker/login-action](https://github.com/docker/login-action) from 4.6.0 to 4.7.0.
- [Release notes](https://github.com/docker/login-action/releases)
- [Commits](https://github.com/docker/login-action/compare/v4.6.0...v4.7.0)

---
updated-dependencies:
- dependency-name: docker/login-action
  dependency-version: 4.7.0
  dependency-type: direct:production
  update-type: version-update:semver-minor
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2026-10-27 04:31:31 +00:00
180 changed files with 4020 additions and 1499 deletions
+1 -1
View File
@@ -82,7 +82,7 @@ jobs:
uses: docker/setup-buildx-action@v4
- name: Login to GitHub Container Registry
uses: docker/login-action@v4.6.0
uses: docker/login-action@v4.7.0
with:
registry: ghcr.io
username: ${{ github.repository_owner }}
+3 -18
View File
@@ -35,24 +35,7 @@ jobs:
if: steps.check-assets.outputs.missing == 'true'
run: sleep 90
check-proto:
runs-on: ubuntu-latest
if: github.event_name != 'pull_request' || github.event.pull_request.head.repo.full_name != github.event.pull_request.base.repo.full_name
steps:
- name: Checkout codebase
uses: actions/checkout@v7
- name: Check Proto Version Header
run: |
head -n 4 core/config.pb.go > ref.txt
find . -name "*.pb.go" ! -name "*_grpc.pb.go" -print0 | while IFS= read -r -d '' file; do
if ! cmp -s ref.txt <(head -n 4 "$file"); then
echo "Error: Header mismatch in $file"
head -n 4 "$file"
exit 1
fi
done
check-format:
check-format-and-proto:
runs-on: ubuntu-latest
if: github.event_name != 'pull_request' || github.event.pull_request.head.repo.full_name != github.event.pull_request.base.repo.full_name
permissions:
@@ -68,6 +51,8 @@ jobs:
cache: false
- name: Check Format
run: go run ./infra/vformat/main.go -mode check -pwd ./
- name: Check Protobuf
run: go run ./infra/vprotogen/main.go -mode check -pwd ./
test:
needs: check-assets
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: app/commander/config.proto
package commander
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: app/dispatcher/config.proto
package dispatcher
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: app/dns/config.proto
package dns
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: app/dns/fakedns/fakedns.proto
package fakedns
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: app/geodata/config.proto
package geodata
+55 -58
View File
@@ -1,6 +1,8 @@
package geodata
import (
"bufio"
"compress/gzip"
"context"
"crypto/tls"
go_errors "errors"
@@ -21,7 +23,10 @@ import (
"golang.org/x/net/http2"
)
const idleTimeout = 30 * time.Second
const (
idleTimeout = 30 * time.Second
maxDownloadSize int64 = 256 * 1024 * 1024
)
// DO NOT EDIT. Ignored by geodata, rejected by Lua.
const luaGuardHeader = "\x12\x01\x00"
@@ -33,7 +38,6 @@ type stage struct {
type downloader struct {
ctx context.Context
httpClient *http.Client
httpsClient *http.Client
}
@@ -61,12 +65,11 @@ func (c *idleConn) Write(b []byte) (int, error) {
func newDownloader(ctx context.Context, dispatcher routing.Dispatcher, outbound string) *downloader {
return &downloader{
ctx: ctx,
httpClient: newClient(ctx, dispatcher, outbound, false),
httpsClient: newClient(ctx, dispatcher, outbound, true),
httpsClient: newClient(ctx, dispatcher, outbound),
}
}
func newClient(baseCtx context.Context, dispatcher routing.Dispatcher, outbound string, isHTTPS bool) *http.Client {
func newClient(baseCtx context.Context, dispatcher routing.Dispatcher, outbound string) *http.Client {
dial := func(ctx context.Context, network, address string) (net.Conn, error) {
var conn net.Conn
err := task.Run(ctx, func() error {
@@ -91,53 +94,33 @@ func newClient(baseCtx context.Context, dispatcher routing.Dispatcher, outbound
Conn: conn,
}, nil
}
if isHTTPS {
return &http.Client{
Transport: &http2.Transport{
DialTLSContext: func(ctx context.Context, network string, address string, cfg *tls.Config) (net.Conn, error) {
conn, err := dial(ctx, network, address)
if err != nil {
return nil, err
}
host, _, _ := net.SplitHostPort(address)
tlsConn := utls.UClient(conn, &utls.Config{ServerName: host}, utls.HelloChrome_Auto)
handshakeCtx, cancel := context.WithTimeout(ctx, idleTimeout)
defer cancel()
if err := tlsConn.HandshakeContext(handshakeCtx); err != nil {
conn.Close()
return nil, err
}
return tlsConn, nil
},
},
CheckRedirect: func(req *http.Request, via []*http.Request) error {
if req.URL.Scheme != "https" {
return errors.New("redirected to non-https URL: ", req.URL.String())
return &http.Client{
Transport: &http2.Transport{
DialTLSContext: func(ctx context.Context, network string, address string, cfg *tls.Config) (net.Conn, error) {
conn, err := dial(ctx, network, address)
if err != nil {
return nil, err
}
if len(via) >= 10 {
return errors.New("stopped after 10 redirects")
host, _, _ := net.SplitHostPort(address)
tlsConn := utls.UClient(conn, &utls.Config{ServerName: host}, utls.HelloChrome_Auto)
handshakeCtx, cancel := context.WithTimeout(ctx, idleTimeout)
defer cancel()
if err := tlsConn.HandshakeContext(handshakeCtx); err != nil {
conn.Close()
return nil, err
}
return nil
return tlsConn, nil
},
}
} else {
return &http.Client{
Transport: &http.Transport{
Proxy: nil,
DisableKeepAlives: true,
DialContext: dial,
ResponseHeaderTimeout: idleTimeout,
},
CheckRedirect: func(req *http.Request, via []*http.Request) error {
if req.URL.Scheme != "https" {
return errors.New("redirected to non-https URL: ", req.URL.String())
}
if len(via) >= 10 {
return errors.New("stopped after 10 redirects")
}
return nil
},
}
},
CheckRedirect: func(req *http.Request, via []*http.Request) error {
if req.URL.Scheme != "https" {
return errors.New("redirected to non-https URL: ", req.URL.String())
}
if len(via) >= 20 {
return errors.New("stopped after 20 redirects")
}
return nil
},
}
}
@@ -203,27 +186,41 @@ func (d *downloader) fetch(rawURL string, writer io.Writer) error {
}
utils.TryDefaultHeadersWith(req.Header, "nav")
var client *http.Client
if req.URL.Scheme == "https" {
client = d.httpsClient
} else {
client = d.httpClient
}
resp, err := client.Do(req)
resp, err := d.httpsClient.Do(req)
if err != nil {
return err
}
defer resp.Body.Close()
if resp.StatusCode < http.StatusOK || resp.StatusCode >= http.StatusMultipleChoices {
io.Copy(io.Discard, resp.Body)
return errors.New("unexpected status code: ", resp.StatusCode)
}
if resp.ContentLength > maxDownloadSize {
return errors.New("geodata download exceeds 256 MiB")
}
n, err := io.Copy(writer, resp.Body)
br := bufio.NewReader(resp.Body)
header, err := br.Peek(2)
if err != nil && err != io.EOF {
return err
}
var body io.Reader = br
if len(header) == 2 && header[0] == 0x1f && header[1] == 0x8b {
zr, err := gzip.NewReader(br)
if err != nil {
return err
}
defer zr.Close()
body = zr
}
n, err := io.Copy(writer, io.LimitReader(body, maxDownloadSize+1))
if err != nil {
return err
}
if n > maxDownloadSize {
return errors.New("geodata download exceeds 256 MiB")
}
if n == 0 {
return errors.New("empty response body")
}
+55 -2
View File
@@ -7,10 +7,13 @@ import (
"net/http/httptest"
"os"
"path/filepath"
"strings"
"testing"
commongeodata "github.com/xtls/xray-core/common/geodata"
xlua "github.com/xtls/xray-core/common/lua"
"github.com/xtls/xray-core/common/serial"
"github.com/xtls/xray-core/core"
"github.com/yuin/gopher-lua/parse"
"google.golang.org/protobuf/proto"
)
@@ -31,11 +34,11 @@ func TestDownloadOneLuaGuard(t *testing.T) {
if err := os.WriteFile(filepath.Join(dir, "asset.lua"), nil, 0o600); err != nil {
t.Fatal(err)
}
server := httptest.NewServer(http.HandlerFunc(func(w http.ResponseWriter, _ *http.Request) {
server := httptest.NewTLSServer(http.HandlerFunc(func(w http.ResponseWriter, _ *http.Request) {
_, _ = w.Write([]byte(tc.body))
}))
defer server.Close()
d := &downloader{ctx: context.Background(), httpClient: server.Client()}
d := &downloader{ctx: context.Background(), httpsClient: server.Client()}
staged, err := d.downloadOne(&Asset{Url: server.URL, File: "asset.lua"})
if err != nil {
t.Fatal(err)
@@ -71,3 +74,53 @@ func TestDownloadOneLuaGuard(t *testing.T) {
})
}
}
func TestProtobufConfigValidation(t *testing.T) {
dir := t.TempDir()
t.Setenv("xray.location.asset", dir)
for _, name := range []string{"asset.dat", "asset.DAT"} {
if err := os.WriteFile(filepath.Join(dir, name), nil, 0o600); err != nil {
t.Fatal(err)
}
}
if err := os.Mkdir(filepath.Join(dir, "directory.dat"), 0o700); err != nil {
t.Fatal(err)
}
server, err := core.New(&core.Config{})
if err != nil {
t.Fatal(err)
}
t.Cleanup(func() { _ = server.Close() })
for _, tc := range []struct {
name string
config *Config
wantError string
}{
{"minutely cron", &Config{Cron: "* * * * *"}, ""},
{"minimum interval", &Config{Cron: "@every 1m"}, ""},
{"short interval", &Config{Cron: "@every 59s"}, "interval must be at least 1 minute"},
{"fractional interval", &Config{Cron: "@every 59.999s"}, "interval must be at least 1 minute"},
{"invalid cron", &Config{Cron: "invalid"}, "invalid geodata cron"},
{"dat extension", &Config{Cron: "@daily", Assets: []*Asset{{Url: "https://example.com/asset.dat", File: "asset.dat"}}}, ""},
{"uppercase extension", &Config{Cron: "@daily", Assets: []*Asset{{Url: "https://example.com/asset.dat", File: "asset.DAT"}}}, ""},
{"invalid extension", &Config{Cron: "@daily", Assets: []*Asset{{Url: "https://example.com/asset.dat", File: "asset.lua"}}}, "extension must be .dat"},
{"missing extension", &Config{Cron: "@daily", Assets: []*Asset{{Url: "https://example.com/asset.dat", File: "asset"}}}, "extension must be .dat"},
{"missing file", &Config{Cron: "@daily", Assets: []*Asset{{Url: "https://example.com/asset.dat", File: "missing.dat"}}}, "invalid geodata asset file"},
{"directory", &Config{Cron: "@daily", Assets: []*Asset{{Url: "https://example.com/asset.dat", File: "directory.dat"}}}, "asset is not a regular file"},
} {
t.Run(tc.name, func(t *testing.T) {
config, err := serial.ToTypedMessage(tc.config).GetInstance()
if err != nil {
t.Fatal(err)
}
_, err = core.CreateObject(server, config)
if tc.wantError == "" {
if err != nil {
t.Fatal(err)
}
} else if err == nil || !strings.Contains(err.Error(), tc.wantError) {
t.Fatalf("CreateObject() error = %v; want %q", err, tc.wantError)
}
})
}
}
+23 -3
View File
@@ -2,12 +2,16 @@ package geodata
import (
"context"
"path/filepath"
"strings"
"sync"
"time"
"github.com/robfig/cron/v3"
"github.com/xtls/xray-core/common"
"github.com/xtls/xray-core/common/errors"
commongeodata "github.com/xtls/xray-core/common/geodata"
"github.com/xtls/xray-core/common/platform/filesystem"
"github.com/xtls/xray-core/core"
"github.com/xtls/xray-core/features/routing"
)
@@ -25,6 +29,24 @@ func New(ctx context.Context, config *Config) (*Instance, error) {
if config.Cron == "" {
return &Instance{}, nil
}
if len(config.Assets) > 100 {
return nil, errors.New("geodata supports at most 100 assets")
}
for _, asset := range config.Assets {
if !strings.EqualFold(filepath.Ext(asset.GetFile()), ".dat") {
return nil, errors.New("geodata asset file extension must be .dat")
}
if _, err := filesystem.ResolveAsset(asset.GetFile()); err != nil {
return nil, errors.New("invalid geodata asset file: ", asset.GetFile()).Base(err)
}
}
schedule, err := cron.ParseStandard(config.Cron)
if err != nil {
return nil, errors.New("invalid geodata cron").Base(err)
}
if interval, ok := schedule.(cron.ConstantDelaySchedule); ok && interval.Delay < time.Minute {
return nil, errors.New("geodata cron interval must be at least 1 minute")
}
g := &Instance{
assets: config.Assets,
@@ -44,9 +66,7 @@ func New(ctx context.Context, config *Config) (*Instance, error) {
cron.WithChain(cron.SkipIfStillRunning(cron.DiscardLogger)),
cron.WithLogger(cron.DiscardLogger),
)
if _, err := g.tasker.AddFunc(config.Cron, g.execute); err != nil {
return nil, errors.New("invalid geodata cron").Base(err)
}
g.tasker.Schedule(schedule, cron.FuncJob(g.execute))
errors.LogInfo(ctx, "scheduled geodata reload with cron: ", config.Cron)
return g, nil
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: app/log/command/config.proto
package command
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go-grpc. DO NOT EDIT.
// versions:
// - protoc-gen-go-grpc v1.6.0
// - protoc v6.33.5
// - protoc-gen-go-grpc v1.6.2
// - protoc (unknown)
// source: app/log/command/config.proto
package command
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: app/log/config.proto
package log
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: app/metrics/config.proto
package metrics
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: app/observatory/burst/config.proto
package burst
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: app/observatory/command/command.proto
package command
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go-grpc. DO NOT EDIT.
// versions:
// - protoc-gen-go-grpc v1.6.0
// - protoc v6.33.5
// - protoc-gen-go-grpc v1.6.2
// - protoc (unknown)
// source: app/observatory/command/command.proto
package command
+14 -14
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: app/observatory/config.proto
package observatory
@@ -152,23 +152,23 @@ func (x *HealthPingMeasurementResult) GetMin() int64 {
type OutboundStatus struct {
state protoimpl.MessageState `protogen:"open.v1"`
// @Document Whether this outbound is usable
// @Restriction ReadOnlyForUser
//@Restriction ReadOnlyForUser
Alive bool `protobuf:"varint,1,opt,name=alive,proto3" json:"alive,omitempty"`
// @Document The time for probe request to finish.
// @Type time.ms
// @Restriction ReadOnlyForUser
//@Type time.ms
//@Restriction ReadOnlyForUser
Delay int64 `protobuf:"varint,2,opt,name=delay,proto3" json:"delay,omitempty"`
// @Document The last error caused this outbound failed to relay probe request
// @Restriction NotMachineReadable
//@Restriction NotMachineReadable
LastErrorReason string `protobuf:"bytes,3,opt,name=last_error_reason,json=lastErrorReason,proto3" json:"last_error_reason,omitempty"`
// @Document The outbound tag for this Server
// @Type id.outboundTag
//@Type id.outboundTag
OutboundTag string `protobuf:"bytes,4,opt,name=outbound_tag,json=outboundTag,proto3" json:"outbound_tag,omitempty"`
// @Document The time this outbound is known to be alive
// @Type id.outboundTag
//@Type id.outboundTag
LastSeenTime int64 `protobuf:"varint,5,opt,name=last_seen_time,json=lastSeenTime,proto3" json:"last_seen_time,omitempty"`
// @Document The time this outbound is tried
// @Type id.outboundTag
//@Type id.outboundTag
LastTryTime int64 `protobuf:"varint,6,opt,name=last_try_time,json=lastTryTime,proto3" json:"last_try_time,omitempty"`
HealthPing *HealthPingMeasurementResult `protobuf:"bytes,7,opt,name=health_ping,json=healthPing,proto3" json:"health_ping,omitempty"`
unknownFields protoimpl.UnknownFields
@@ -257,14 +257,14 @@ func (x *OutboundStatus) GetHealthPing() *HealthPingMeasurementResult {
type ProbeResult struct {
state protoimpl.MessageState `protogen:"open.v1"`
// @Document Whether this outbound is usable
// @Restriction ReadOnlyForUser
//@Restriction ReadOnlyForUser
Alive bool `protobuf:"varint,1,opt,name=alive,proto3" json:"alive,omitempty"`
// @Document The time for probe request to finish.
// @Type time.ms
// @Restriction ReadOnlyForUser
//@Type time.ms
//@Restriction ReadOnlyForUser
Delay int64 `protobuf:"varint,2,opt,name=delay,proto3" json:"delay,omitempty"`
// @Document The error caused this outbound failed to relay probe request
// @Restriction NotMachineReadable
//@Restriction NotMachineReadable
LastErrorReason string `protobuf:"bytes,3,opt,name=last_error_reason,json=lastErrorReason,proto3" json:"last_error_reason,omitempty"`
unknownFields protoimpl.UnknownFields
sizeCache protoimpl.SizeCache
@@ -324,7 +324,7 @@ func (x *ProbeResult) GetLastErrorReason() string {
type Intensity struct {
state protoimpl.MessageState `protogen:"open.v1"`
// @Document The time interval for a probe request in ms.
// @Type time.ms
//@Type time.ms
ProbeInterval uint32 `protobuf:"varint,1,opt,name=probe_interval,json=probeInterval,proto3" json:"probe_interval,omitempty"`
unknownFields protoimpl.UnknownFields
sizeCache protoimpl.SizeCache
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: app/policy/config.proto
package policy
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: app/proxyman/command/command.proto
package command
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go-grpc. DO NOT EDIT.
// versions:
// - protoc-gen-go-grpc v1.6.0
// - protoc v6.33.5
// - protoc-gen-go-grpc v1.6.2
// - protoc (unknown)
// source: app/proxyman/command/command.proto
package command
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: app/proxyman/config.proto
package proxyman
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: app/reverse/config.proto
package reverse
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: app/router/command/command.proto
package command
+13 -12
View File
@@ -34,18 +34,19 @@ message RoutingContext {
// opened by xray-core.
// * FieldSelectors selects a subset of fields in routing statistics to return.
// Valid selectors:
// - inbound: Selects connection's inbound tag.
// - network: Selects connection's network.
// - ip: Equivalent as "ip_source" and "ip_target", selects both source and
// target IP.
// - port: Equivalent as "port_source" and "port_target", selects both source
// and target port.
// - domain: Selects target domain.
// - protocol: Select connection's protocol.
// - user: Select connection's inbound user email.
// - attributes: Select connection's additional attributes.
// - outbound: Equivalent as "outbound" and "outbound_group", select both
// outbound tag and outbound group tags.
// - inbound: Selects connection's inbound tag.
// - network: Selects connection's network.
// - ip: Equivalent as "ip_source" and "ip_target", selects both source and
// target IP.
// - port: Equivalent as "port_source" and "port_target", selects both source
// and target port.
// - domain: Selects target domain.
// - protocol: Select connection's protocol.
// - user: Select connection's inbound user email.
// - attributes: Select connection's additional attributes.
// - outbound: Equivalent as "outbound" and "outbound_group", select both
// outbound tag and outbound group tags.
//
// * If FieldSelectors is left empty, all fields will be returned.
message SubscribeRoutingStatsRequest {
repeated string FieldSelectors = 1;
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go-grpc. DO NOT EDIT.
// versions:
// - protoc-gen-go-grpc v1.6.0
// - protoc v6.33.5
// - protoc-gen-go-grpc v1.6.2
// - protoc (unknown)
// source: app/router/command/command.proto
package command
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: app/router/config.proto
package router
+2 -1
View File
@@ -24,6 +24,7 @@ import (
"github.com/xtls/xray-core/features/outbound"
"github.com/xtls/xray-core/features/routing"
routing_session "github.com/xtls/xray-core/features/routing/session"
"github.com/xtls/xray-core/proxy/blackhole"
"github.com/xtls/xray-core/proxy/freedom"
)
@@ -396,7 +397,7 @@ end`)
serial.ToTypedMessage(&proxyman.OutboundConfig{}),
},
Outbound: []*core.OutboundHandlerConfig{
{Tag: "default", ProxySettings: serial.ToTypedMessage(&freedom.Config{FinalRules: []*freedom.FinalRuleConfig{{Action: freedom.RuleAction_Block}}})},
{Tag: "default", ProxySettings: serial.ToTypedMessage(&blackhole.Config{})},
{Tag: "direct", ProxySettings: serial.ToTypedMessage(&freedom.Config{
FinalRules: []*freedom.FinalRuleConfig{{Action: freedom.RuleAction_Allow}},
})},
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: app/stats/command/command.proto
package command
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go-grpc. DO NOT EDIT.
// versions:
// - protoc-gen-go-grpc v1.6.0
// - protoc v6.33.5
// - protoc-gen-go-grpc v1.6.2
// - protoc (unknown)
// source: app/stats/command/command.proto
package command
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: app/stats/config.proto
package stats
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: app/version/config.proto
package version
+59 -17
View File
@@ -8,23 +8,65 @@ import (
var privateIPMatcher = sync.OnceValue(func() IPMatcher {
return common.Must2(IPReg.BuildIPMatcher(common.Must2(ParseIPRules([]string{
"0.0.0.0/8",
"10.0.0.0/8",
"100.64.0.0/10",
"127.0.0.0/8",
"169.254.0.0/16",
"172.16.0.0/12",
"192.0.0.0/24",
"192.0.2.0/24",
"192.88.99.0/24",
"192.168.0.0/16",
"198.18.0.0/15",
"198.51.100.0/24",
"203.0.113.0/24",
"224.0.0.0/3",
"::/127",
"fc00::/7",
"fe80::/10",
// https://www.iana.org/assignments/iana-ipv4-special-registry
"0.0.0.0/8", // "This network"
"0.0.0.0/32", // "This host on this network"
"10.0.0.0/8", // Private-Use
"100.64.0.0/10", // Shared Address Space
"127.0.0.0/8", // Loopback
"169.254.0.0/16", // Link Local
"172.16.0.0/12", // Private-Use
// "192.0.0.0/24", // IETF Protocol Assignments
"192.0.0.0/29", // IPv4 Service Continuity Prefix
"192.0.0.8/32", // IPv4 dummy address
"192.0.0.9/32", // Port Control Protocol Anycast
"192.0.0.10/32", // Traversal Using Relays around NAT Anycast
"192.0.0.170/32", // NAT64/DNS64 Discovery
"192.0.0.171/32", // NAT64/DNS64 Discovery
"192.0.2.0/24", // Documentation (TEST-NET-1)
// "192.31.196.0/24", // AS112-v4
"192.52.193.0/24", // AMT
// "192.88.99.0/24", // Deprecated (6to4 Relay Anycast)
"192.88.99.2/32", // 6a44-relay anycast address
"192.168.0.0/16", // Private-Use
// "192.175.48.0/24", // Direct Delegation AS112 Service
"198.18.0.0/15", // Benchmarking
"198.51.100.0/24", // Documentation (TEST-NET-2)
"203.0.113.0/24", // Documentation (TEST-NET-3)
"240.0.0.0/4", // Reserved
"255.255.255.255/32", // Limited Broadcast
// https://www.iana.org/assignments/multicast-addresses
"224.0.0.0/4",
// https://www.iana.org/assignments/iana-ipv6-special-registry
"::1/128", // Loopback Address
"::/128", // Unspecified Address
// "::ffff:0:0/96", // IPv4-mapped Address
"64:ff9b::/96", // IPv4-IPv6 Translat.
"64:ff9b:1::/48", // IPv4-IPv6 Translat.
"100::/64", // Discard-Only Address Block
"100:0:0:1::/64", // Dummy IPv6 Prefix
// "2001::/23", // IETF Protocol Assignments
"2001::/32", // TEREDO
"2001:1::1/128", // Port Control Protocol Anycast
"2001:1::2/128", // Traversal Using Relays around NAT Anycast
"2001:1::3/128", // DNS-SD Service Registration Protocol Anycast
"2001:2::/48", // Benchmarking
"2001:3::/32", // AMT
// "2001:4:112::/48", // AS112-v6
// "2001:10::/28", // Deprecated (previously ORCHID)
"2001:20::/28", // ORCHIDv2
"2001:30::/28", // Drone Remote ID Protocol Entity Tags (DETs) Prefix
"2001:db8::/32", // Documentation
"2002::/16", // 6to4
// "2620:4f:8000::/48", // Direct Delegation AS112 Service
"3fff::/20", // Documentation
"5f00::/16", // Segment Routing (SRv6) SIDs
"fc00::/7", // Unique-Local
"fe80::/10", // Link-Local Unicast
// https://www.iana.org/assignments/ipv6-multicast-addresses
"ff00::/8",
}))))
})
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: common/geodata/geodat.proto
package geodata
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: common/log/log.proto
package log
+2 -2
View File
@@ -11,7 +11,7 @@ import (
"github.com/xtls/xray-core/common/base64"
"github.com/xtls/xray-core/common/errors"
"github.com/xtls/xray-core/common/platform"
"github.com/xtls/xray-core/common/platform/filesystem"
glua "github.com/yuin/gopher-lua"
"github.com/yuin/gopher-lua/parse"
)
@@ -36,7 +36,7 @@ func Compile(script string) (*Program, error) {
// TODO: Restore inline script support and re-enable the related tests.
return nil, errors.New("currently unavailable")
code, err = base64.Decode(script)
} else if name, err = platform.ResolveLuaFile(script); err == nil {
} else if name, err = filesystem.ResolveLuaFile(script); err == nil {
code, err = os.ReadFile(name)
// TODO: Restore privileged signature authorization and re-enable the related tests and CLI entries.
// if err == nil {
+8 -11
View File
@@ -187,19 +187,20 @@ func TestCompileInlineDiagnostics(t *testing.T) {
*/
func TestCompileFileExtension(t *testing.T) {
for _, name := range []string{"script", "script.dat", "script.lua.txt", "script.LUA"} {
for _, name := range []string{"script", "script.dat", "script.lua.txt"} {
if program, err := Compile(name); program != nil || err == nil || !strings.Contains(err.Error(), "Lua file extension must be .lua") {
t.Fatalf("Compile(%q) = %v, %v; want nil program and .lua extension error", name, program, err)
}
}
for _, name := range []string{"script.lua", "script.LUA", "script.Lua", "script.lUa"} {
path := filepath.Join(t.TempDir(), name)
if err := os.WriteFile(path, []byte("value = 42"), 0o600); err != nil {
t.Fatal(err)
}
if program, err := Compile(path); program != nil || err == nil || !strings.Contains(err.Error(), "Lua file extension must be .lua") {
t.Fatalf("Compile(%q) = %v, %v; want nil program and .lua extension error", path, program, err)
if program, err := Compile(path); program == nil || err != nil {
t.Fatalf("Compile(%q) = %v, %v; want successful compilation", path, program, err)
}
}
path := writeTestScript(t, "value = 42") + string(filepath.Separator) + "."
if program, err := Compile(path); program == nil || err != nil {
t.Fatalf("Compile(%q) = %v, %v; want acceptance of the resolved .lua path", path, program, err)
}
}
func TestCompileRejectsReadFailure(t *testing.T) {
@@ -234,10 +235,6 @@ func writeTestScript(t *testing.T, code string) string {
if err := os.WriteFile(path, []byte(code), 0o600); err != nil {
t.Fatal(err)
}
path, err := filepath.EvalSymlinks(path)
if err != nil {
t.Fatal(err)
}
return path
}
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: common/net/address.proto
package net
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: common/net/destination.proto
package net
+12 -18
View File
@@ -4,7 +4,7 @@ package net
import (
"bufio"
"encoding/hex"
"encoding/binary"
"fmt"
"net"
"os"
@@ -45,10 +45,7 @@ func FindProcess(network, srcIP string, srcPort uint16, destIP string, destPort
panic("Unsupported network type for process lookup.")
}
targetHexAddr, err := formatLittleEndianString(net.ParseIP(srcIP), Port(srcPort))
if err != nil {
return 0, "", "", errors.New("failed to format address: ", err)
}
targetHexAddr := formatProcNetAddress(net.ParseIP(srcIP), Port(srcPort))
portFallback := ""
if network == "udp" {
@@ -87,24 +84,21 @@ func FindProcess(network, srcIP string, srcPort uint16, destIP string, destPort
return pid, procName, absPath, nil
}
func formatLittleEndianString(addr net.IP, port Port) (string, error) {
ip := addr
func formatProcNetAddress(addr net.IP, port Port) string {
var ipBytes []byte
if ip.To4() != nil {
ipBytes = ip.To4()
if ipv4 := addr.To4(); ipv4 != nil {
ipBytes = ipv4
} else {
ipBytes = ip.To16()
}
if ipBytes == nil {
return "", errors.New("invalid IP format for ", addr, ": ", ip)
ipBytes = addr.To16()
}
for i, j := 0, len(ipBytes)-1; i < j; i, j = i+1, j-1 {
ipBytes[i], ipBytes[j] = ipBytes[j], ipBytes[i]
var formatted strings.Builder
formatted.Grow(len(ipBytes)*2 + 5)
for i := 0; i < len(ipBytes); i += 4 {
fmt.Fprintf(&formatted, "%08X", binary.NativeEndian.Uint32(ipBytes[i:i+4]))
}
portHex := fmt.Sprintf("%04X", uint16(port))
ipHex := strings.ToUpper(hex.EncodeToString(ipBytes))
return fmt.Sprintf("%s:%s", ipHex, portHex), nil
fmt.Fprintf(&formatted, ":%04X", uint16(port))
return formatted.String()
}
func findInodeInFiles(filePaths []string, targetHexAddr, portFallback string) (string, error) {
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: common/net/network.proto
package net
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: common/net/port.proto
package net
+24 -24
View File
@@ -5,6 +5,7 @@ import (
"io"
"os"
"path/filepath"
"strings"
"github.com/xtls/xray-core/common/buf"
"github.com/xtls/xray-core/common/platform"
@@ -26,14 +27,6 @@ func ReadFile(path string) ([]byte, error) {
return buf.ReadAllToBytes(reader)
}
func ReadAsset(file string) ([]byte, error) {
path, _, err := getAssetFileLocation(file)
if err != nil {
return nil, err
}
return ReadFile(path)
}
func OpenAsset(file string) (io.ReadCloser, int64, error) {
path, info, err := getAssetFileLocation(file)
if err != nil {
@@ -43,11 +36,6 @@ func OpenAsset(file string) (io.ReadCloser, int64, error) {
return r, info.Size(), err
}
func StatAsset(file string) (os.FileInfo, error) {
_, info, err := getAssetFileLocation(file)
return info, err
}
func ResolveAsset(file string) (string, error) {
path, _, err := getAssetFileLocation(file)
return path, err
@@ -79,17 +67,29 @@ func ReadCert(file string) ([]byte, error) {
return ReadFile(platform.GetCertLocation(file))
}
func CopyFile(dst string, src string) error {
bytes, err := ReadFile(src)
if err != nil {
return err
// ResolveLuaFile finds a local .lua script and returns its absolute path.
// Relative paths: XRAY_LOCATION_CONFDIR > XRAY_LOCATION_CONFIG > working dir > executable dir.
func ResolveLuaFile(path string) (string, error) {
if !strings.EqualFold(filepath.Ext(path), ".lua") {
return "", errors.New("Lua file extension must be .lua")
}
f, err := os.OpenFile(dst, os.O_CREATE|os.O_WRONLY, 0o644)
if err != nil {
return err
if filepath.IsAbs(path) {
return path, nil
}
defer f.Close()
_, err = f.Write(bytes)
return err
for _, dir := range []string{
platform.GetConfDirPath(),
platform.NewEnvFlag(platform.ConfigLocation).GetValue(func() string { return "" }),
".",
platform.GetExecutableDir(),
} {
if dir != "" {
resolved := filepath.Join(dir, path)
if _, err := os.Stat(resolved); err == nil {
return filepath.Abs(resolved)
} else if !os.IsNotExist(err) {
return "", err
}
}
}
return "", os.ErrNotExist
}
+47 -2
View File
@@ -1,13 +1,17 @@
package filesystem_test
import (
"errors"
"os"
"path/filepath"
"testing"
"github.com/xtls/xray-core/common"
"github.com/xtls/xray-core/common/platform"
. "github.com/xtls/xray-core/common/platform/filesystem"
)
func TestStatAssetRejectsInvalidPath(t *testing.T) {
func TestResolveAssetRejectsInvalidPath(t *testing.T) {
for _, file := range []string{
"",
".",
@@ -25,8 +29,49 @@ func TestStatAssetRejectsInvalidPath(t *testing.T) {
`nested\..\geoip.dat`,
filepath.Join(t.TempDir(), "geoip.dat"),
} {
if _, err := StatAsset(file); err == nil {
if _, err := ResolveAsset(file); err == nil {
t.Fatalf("expected error for %q", file)
}
}
}
func TestResolveLuaFile(t *testing.T) {
t.Chdir(t.TempDir())
workingDir, err := os.Getwd()
common.Must(err)
executable, err := os.Executable()
common.Must(err)
file, err := os.CreateTemp(filepath.Dir(executable), "lua-*.lua")
common.Must(err)
common.Must(file.Close())
defer os.Remove(file.Name())
name := filepath.Base(file.Name())
paths := []string{
filepath.Join(t.TempDir(), name),
filepath.Join(t.TempDir(), name),
filepath.Join(workingDir, name),
file.Name(),
}
t.Setenv(platform.ConfdirLocation, filepath.Dir(paths[0]))
t.Setenv(platform.ConfigLocation, filepath.Dir(paths[1]))
for _, path := range paths[:3] {
common.Must(os.WriteFile(path, nil, 0o600))
}
if got, err := ResolveLuaFile(paths[2]); err != nil || got != paths[2] {
t.Fatalf("absolute path = %q, %v; want %q", got, err, paths[2])
}
for i, want := range paths {
if i == 2 {
t.Setenv(platform.ConfdirLocation, "")
t.Setenv(platform.ConfigLocation, "")
}
if got, err := ResolveLuaFile(name); err != nil || got != want {
t.Fatalf("resolved path = %q, %v; want %q", got, err, want)
}
common.Must(os.Remove(want))
}
if _, err := ResolveLuaFile(name); !errors.Is(err, os.ErrNotExist) {
t.Fatalf("missing file error = %v", err)
}
}
+2 -2
View File
@@ -14,7 +14,7 @@ func LineSeparator() string {
// GetAssetLocation searches for `file` in the env dir, the executable dir, and certain locations
func GetAssetLocation(file string) string {
assetPath := NewEnvFlag(AssetLocation).GetValue(getExecutableDir)
assetPath := NewEnvFlag(AssetLocation).GetValue(GetExecutableDir)
defPath := filepath.Join(assetPath, file)
for _, p := range []string{
defPath,
@@ -36,6 +36,6 @@ func GetAssetLocation(file string) string {
// GetCertLocation searches for `file` in the env dir and the executable dir
func GetCertLocation(file string) string {
certPath := NewEnvFlag(CertLocation).GetValue(getExecutableDir)
certPath := NewEnvFlag(CertLocation).GetValue(GetExecutableDir)
return filepath.Join(certPath, file)
}
+2 -65
View File
@@ -1,8 +1,6 @@
package platform // import "github.com/xtls/xray-core/common/platform"
import (
"errors"
"fmt"
"os"
"path/filepath"
"strconv"
@@ -74,7 +72,7 @@ func NormalizeEnvName(name string) string {
return strings.ReplaceAll(strings.ToUpper(strings.TrimSpace(name)), ".", "_")
}
func getExecutableDir() string {
func GetExecutableDir() string {
exec, err := os.Executable()
if err != nil {
return ""
@@ -83,7 +81,7 @@ func getExecutableDir() string {
}
func GetConfigurationPath() string {
configPath := NewEnvFlag(ConfigLocation).GetValue(getExecutableDir)
configPath := NewEnvFlag(ConfigLocation).GetValue(GetExecutableDir)
return filepath.Join(configPath, "config.json")
}
@@ -92,64 +90,3 @@ func GetConfDirPath() string {
configPath := NewEnvFlag(ConfdirLocation).GetValue(func() string { return "" })
return configPath
}
// ResolveLuaFile finds a local .lua script and returns its resolved absolute path.
// Relative paths: XRAY_LOCATION_CONFDIR > XRAY_LOCATION_CONFIG > working dir > executable dir.
func ResolveLuaFile(path string) (string, error) {
if path == "" {
return "", errors.New("Lua file path is empty")
}
paths := []string{path}
if !filepath.IsAbs(path) {
paths = nil
for _, dir := range []string{
GetConfDirPath(),
NewEnvFlag(ConfigLocation).GetValue(func() string { return "" }),
".",
getExecutableDir(),
} {
if dir != "" {
paths = append(paths, filepath.Join(dir, path))
}
}
}
path, err := resolveFile(paths)
if err != nil {
return "", err
}
return resolveLuaTarget(path)
}
func resolveLuaTarget(path string) (string, error) {
path, err := filepath.EvalSymlinks(path)
if err != nil {
return "", fmt.Errorf("failed to resolve Lua file symlinks: %w", err)
}
if filepath.Ext(path) != ".lua" {
return "", errors.New("Lua file extension must be .lua")
}
return path, nil
}
func resolveFile(paths []string) (string, error) {
var tried []string
for _, path := range paths {
path, err := filepath.Abs(path)
if err != nil {
return "", fmt.Errorf("failed to resolve file path: %w", err)
}
tried = append(tried, path)
info, err := os.Stat(path)
if errors.Is(err, os.ErrNotExist) {
continue
}
if err != nil {
return "", fmt.Errorf("failed to inspect file %q: %w", path, err)
}
if !info.Mode().IsRegular() {
return "", fmt.Errorf("file is not a regular file: %s", path)
}
return path, nil
}
return "", fmt.Errorf("file not found; tried %q: %w", tried, os.ErrNotExist)
}
-88
View File
@@ -1,11 +1,9 @@
package platform_test
import (
"errors"
"os"
"path/filepath"
"runtime"
"strings"
"testing"
"github.com/xtls/xray-core/common"
@@ -66,89 +64,3 @@ func TestGetAssetLocation(t *testing.T) {
}
}
}
func TestResolveLuaFile(t *testing.T) {
workingDir := t.TempDir()
t.Chdir(workingDir)
executable, err := os.Executable()
common.Must(err)
file, err := os.CreateTemp(filepath.Dir(executable), "lua-*.lua")
common.Must(err)
common.Must(file.Close())
defer os.Remove(file.Name())
name := filepath.Base(file.Name())
paths := []string{
filepath.Join(t.TempDir(), name),
filepath.Join(t.TempDir(), name),
filepath.Join(workingDir, name),
file.Name(),
}
t.Setenv(ConfdirLocation, filepath.Dir(paths[0]))
t.Setenv(ConfigLocation, filepath.Dir(paths[1]))
for _, path := range paths[:3] {
common.Must(os.WriteFile(path, nil, 0o600))
}
for i, path := range paths {
paths[i], err = filepath.EvalSymlinks(path)
common.Must(err)
}
if got, err := ResolveLuaFile(paths[2]); err != nil || got != paths[2] {
t.Fatalf("absolute path = %q, %v; want %q", got, err, paths[2])
}
for i, want := range paths {
if i == 2 {
t.Setenv(ConfdirLocation, "")
t.Setenv(ConfigLocation, "")
}
if got, err := ResolveLuaFile(name); err != nil || got != want {
t.Fatalf("resolved path = %q, %v; want %q", got, err, want)
}
common.Must(os.Remove(want))
}
if _, err := ResolveLuaFile(name); !errors.Is(err, os.ErrNotExist) {
t.Fatalf("missing file error = %v", err)
}
t.Setenv(ConfdirLocation, filepath.Dir(paths[0]))
t.Setenv(ConfigLocation, filepath.Dir(paths[1]))
common.Must(os.Mkdir(paths[0], 0o700))
common.Must(os.WriteFile(paths[1], nil, 0o600))
for _, path := range []string{"", name, filepath.Join(t.TempDir(), name)} {
if _, err := ResolveLuaFile(path); err == nil {
t.Fatalf("accepted invalid path %q", path)
}
}
}
func TestResolveLuaFileSymlink(t *testing.T) {
for _, tc := range []struct {
link, target string
valid bool
}{
{"alias.lua", "data.dat", false},
{"alias.dat", "script.lua", true},
} {
t.Run(tc.link, func(t *testing.T) {
dir, err := filepath.EvalSymlinks(t.TempDir())
common.Must(err)
target := filepath.Join(dir, tc.target)
common.Must(os.WriteFile(target, nil, 0o600))
link := filepath.Join(dir, tc.link)
if err := os.Symlink(tc.target, link); err != nil {
if runtime.GOOS == "windows" {
t.Skipf("cannot create symlinks: %v", err)
}
t.Fatal(err)
}
got, err := ResolveLuaFile(link)
if tc.valid {
if err != nil || got != target {
t.Fatalf("ResolveLuaFile(%q) = %q, %v; want %q", link, got, err, target)
}
} else if err == nil || got != "" || !strings.Contains(err.Error(), "Lua file extension must be .lua") {
t.Fatalf("ResolveLuaFile(%q) = %q, %v; want .lua extension error", link, got, err)
}
})
}
}
+2 -2
View File
@@ -11,12 +11,12 @@ func LineSeparator() string {
// GetAssetLocation searches for `file` in the env dir and the executable dir
func GetAssetLocation(file string) string {
assetPath := NewEnvFlag(AssetLocation).GetValue(getExecutableDir)
assetPath := NewEnvFlag(AssetLocation).GetValue(GetExecutableDir)
return filepath.Join(assetPath, file)
}
// GetCertLocation searches for `file` in the env dir and the executable dir
func GetCertLocation(file string) string {
certPath := NewEnvFlag(CertLocation).GetValue(getExecutableDir)
certPath := NewEnvFlag(CertLocation).GetValue(GetExecutableDir)
return filepath.Join(certPath, file)
}
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: common/protocol/headers.proto
package protocol
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: common/protocol/server_spec.proto
package protocol
+4
View File
@@ -101,6 +101,10 @@ func ReadClientHello(data []byte, h *SniffHeader) error {
return errNotClientHello
}
if nameType == 0 {
// RFC 6066 requires a non-empty HostName.
if nameLen == 0 {
return errNotClientHello
}
// QUIC separated across packets
// May cause the serverName to be incomplete
b := byte(0)
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: common/protocol/user.proto
package protocol
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: common/serial/typed_message.proto
package serial
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: core/config.proto
package core
+1 -1
View File
@@ -20,7 +20,7 @@ import (
var (
Version_x byte = 26
Version_y byte = 10
Version_z byte = 21
Version_z byte = 31
)
var (
-2
View File
@@ -1,5 +1,3 @@
package core
//go:generate go install -v google.golang.org/protobuf/cmd/protoc-gen-go@latest
//go:generate go install -v google.golang.org/grpc/cmd/protoc-gen-go-grpc@latest
//go:generate go run ../infra/vprotogen/main.go -pwd ./..
+10
View File
@@ -2,6 +2,7 @@ package localdns
import (
"context"
"net/netip"
"syscall"
"time"
@@ -100,6 +101,15 @@ func New() *Client {
if internet.IsSkippedDNSServer(address) {
return nil, errors.New("skipped DNS server ", address)
}
// A socket of the server's IP version only needs that version bound
// to the interface, which a dual-stack one would need both of.
if ap, err := netip.ParseAddrPort(address); err == nil && (network == "udp" || network == "tcp") {
if ap.Addr().Unmap().Is4() {
network += "4"
} else {
network += "6"
}
}
return d.DialContext(ctx, network, address)
},
}
+11 -4
View File
@@ -4,6 +4,7 @@ go 1.27
require (
github.com/apernet/quic-go v0.61.1-0.20260806010916-184d081eef3e
github.com/bufbuild/protocompile v0.14.1
github.com/ghodss/yaml v1.0.1-0.20220118164431-d8423dcdf344
github.com/golang/mock v1.7.0-rc.1
github.com/google/go-cmp v0.7.0
@@ -14,7 +15,7 @@ require (
github.com/miekg/dns v1.1.73
github.com/pelletier/go-toml v1.9.5
github.com/pion/stun/v3 v3.1.7
github.com/pires/go-proxyproto v0.15.0
github.com/pires/go-proxyproto v0.16.0
github.com/refraction-networking/utls v1.8.3-0.20260301010127-aa6edf4b11af
github.com/robfig/cron/v3 v3.0.1
github.com/stretchr/testify v1.12.1
@@ -25,13 +26,13 @@ require (
golang.org/x/crypto v0.58.0
golang.org/x/crypto/x509roots/fallback v0.0.0-20261020153306-9f2b28d4331a
golang.org/x/exp v0.0.0-20240506185415-9bf2ced13842
golang.org/x/net v0.61.0
golang.org/x/net v0.62.0
golang.org/x/sync v0.24.0
golang.org/x/sys v0.49.0
golang.zx2c4.com/wintun v0.0.0-20230126152724-0fa3db229ce2
golang.zx2c4.com/wireguard v0.0.0-20250521234502-f333402bd9cb
golang.zx2c4.com/wireguard/windows v1.1.1
google.golang.org/grpc v1.84.0
google.golang.org/grpc v1.85.0
google.golang.org/protobuf v1.36.12
h12.io/socks v1.0.3
layeh.com/gopher-luar v1.0.11
@@ -57,7 +58,13 @@ require (
go.yaml.in/yaml/v3 v3.0.5 // indirect
golang.org/x/text v0.43.0 // indirect
golang.org/x/tools v0.51.0 // indirect
google.golang.org/genproto/googleapis/rpc v0.0.0-20260706201446-f0a921348800 // indirect
google.golang.org/genproto/googleapis/rpc v0.0.0-20260817212433-ac3dfec99bb1 // indirect
google.golang.org/grpc/cmd/protoc-gen-go-grpc v1.6.2 // indirect
gopkg.in/yaml.v2 v2.4.0 // indirect
gvisor.dev/gvisor v0.0.0-20260122175437-89a5d21be8f0 // indirect
)
tool (
google.golang.org/grpc/cmd/protoc-gen-go-grpc
google.golang.org/protobuf/cmd/protoc-gen-go
)
+12 -8
View File
@@ -2,6 +2,8 @@ github.com/andybalholm/brotli v1.2.3 h1:8H1qwOkl2LPfjf3YezB90JnCliZb6SInJ/OJkEbA
github.com/andybalholm/brotli v1.2.3/go.mod h1:rzTDkvFWvIrjDXZHkuS16NPggd91W3kUSvPlQ1pLaKY=
github.com/apernet/quic-go v0.61.1-0.20260806010916-184d081eef3e h1:5mgtR5gwIgBKMiGI1QdXldZZ+SNor06Nbu1wCBulQBg=
github.com/apernet/quic-go v0.61.1-0.20260806010916-184d081eef3e/go.mod h1:x7qxEvX6MCVtDuBKHj3E+88+BtrbEMuAL5qGUKItjW8=
github.com/bufbuild/protocompile v0.14.1 h1:iA73zAf/fyljNjQKwYzUHD6AD4R8KMasmwa/FBatYVw=
github.com/bufbuild/protocompile v0.14.1/go.mod h1:ppVdAIhbr2H8asPk6k4pY7t9zB1OU5DoEw9xY/FUi1c=
github.com/chzyer/logex v1.1.10/go.mod h1:+Ywpsq7O8HXn0nuIou7OrIPyXbp3wmkHB+jjWRnGsAI=
github.com/chzyer/readline v0.0.0-20180603132655-2972be24d48e/go.mod h1:nSuG5e5PlCu98SY8svDHJxuZscDgtXS6KTTbou5AhLI=
github.com/chzyer/test v0.0.0-20180213035817-a1ea475d72b1/go.mod h1:Q3SI9o4m/ZMnBNeIyt5eFwwo7qiLfzFZmjNmxjkiQlU=
@@ -59,8 +61,8 @@ github.com/pion/stun/v3 v3.1.7 h1:uRXMTlGLf89WgItGNyZ6aR5jMTX0NBbybXADpQCzn+E=
github.com/pion/stun/v3 v3.1.7/go.mod h1:Nq77RW4aRrSNrltf2ksUJLjxWeipj4lnlgdsYIxC8g8=
github.com/pion/transport/v4 v4.1.0 h1:8S+nF2reM2cJuqC6g78OVy2BBgmbdns+acx3jA97BvQ=
github.com/pion/transport/v4 v4.1.0/go.mod h1:06hFI+jCFcok2X2MekVufNZ/uzNZXivGBPfviSVcjgM=
github.com/pires/go-proxyproto v0.15.0 h1:dTshmNbFm/D+0+sbrxUuddPOZ5Y0B7c5NhtsBkm6LqI=
github.com/pires/go-proxyproto v0.15.0/go.mod h1:OXsCrKwrK2tXS9YrI5tkHx5xaQlO8FH3lFW76orFh24=
github.com/pires/go-proxyproto v0.16.0 h1:9KYT/fM3wpjT8bdMEj/7FBcoiUG1KyzEjRYnPu+vz7A=
github.com/pires/go-proxyproto v0.16.0/go.mod h1:n7yhg8yIfNl3KgYDCwBzmeUHNpKTVnUhcWpc7rV4RW4=
github.com/quic-go/go-ossfuzz-seeds v0.1.0 h1:APacT+iIaNF6fd8AGEiN3bT/Jtkd2jz4v4TzM7MFjy0=
github.com/quic-go/go-ossfuzz-seeds v0.1.0/go.mod h1:3IOHRbJIc+L6YKMwfDtJAM9Vj9k0YY4muhuyUYk5tbk=
github.com/quic-go/qpack v0.6.0 h1:g7W+BMYynC1LbYLSqRt8PBg5Tgwxn214ZZR34VIOjz8=
@@ -107,8 +109,8 @@ golang.org/x/mod v0.5.1/go.mod h1:5OXOZSfqPIIbmVBIIKWRFfZjPR0E5r58TLhUjH0a2Ro=
golang.org/x/net v0.0.0-20190404232315-eb5bcb51f2a3/go.mod h1:t9HGtf8HONx5eT2rtn7q6eTqICYqUVnKs3thJo3Qplg=
golang.org/x/net v0.0.0-20190620200207-3b0461eec859/go.mod h1:z5CRVTTTmAJ677TzLLGU+0bjPO0LkuOLi4/5GtJWs/s=
golang.org/x/net v0.0.0-20211015210444-4f30a5c0130f/go.mod h1:9nx3DQGgdP8bBQD5qxJ1jj9UTztislL4KSBs9R2vV5Y=
golang.org/x/net v0.61.0 h1:RR+6j/BTBCrggOLugxa+66R8FvoN6MHlzDlZIbN9YFw=
golang.org/x/net v0.61.0/go.mod h1:WgDCOTH8iwtB66T4/GfI94AHo/hhdb7Hah9NDseQfiI=
golang.org/x/net v0.62.0 h1:18ELalfM5+XNRwzM2nYqXsZQ9ByS1uhj2O/U7+5jqRY=
golang.org/x/net v0.62.0/go.mod h1:WgDCOTH8iwtB66T4/GfI94AHo/hhdb7Hah9NDseQfiI=
golang.org/x/sync v0.0.0-20190423024810-112230192c58/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
golang.org/x/sync v0.0.0-20210220032951-036812b2e83c/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
golang.org/x/sync v0.24.0 h1:iqiDrGoDgyuvAKrhLQthUEzU/R378N78gXbBjxed7oA=
@@ -148,10 +150,12 @@ golang.zx2c4.com/wireguard/windows v1.1.1 h1:8/H97U1v1PNDNcBsMZgU3KFuND9MQdTsU2N
golang.zx2c4.com/wireguard/windows v1.1.1/go.mod h1:+fbT3FFdX4zzYDLwJh5+HPEcNN/3HyNdzhNSVsQM+zs=
gonum.org/v1/gonum v0.17.0 h1:VbpOemQlsSMrYmn7T2OUvQ4dqxQXU+ouZFQsZOx50z4=
gonum.org/v1/gonum v0.17.0/go.mod h1:El3tOrEuMpv2UdMrbNlKEh9vd86bmQ6vqIcDwxEOc1E=
google.golang.org/genproto/googleapis/rpc v0.0.0-20260706201446-f0a921348800 h1:qEHAMpSaUhtD0p3NbEEI83HwNGFxEwaSJ1G9PLnCBZE=
google.golang.org/genproto/googleapis/rpc v0.0.0-20260706201446-f0a921348800/go.mod h1:4Hqkh8ycfw05ld/3BWL7rJOSfebL2Q+DVDeRgYgxUU8=
google.golang.org/grpc v1.84.0 h1:soMyaPJ8pAak5PIQ0DGBUir0XRo2fRoMqhNWMLlLxO0=
google.golang.org/grpc v1.84.0/go.mod h1:ljCht0DrxQrXBDRTZp52Qxh3Ffk8CdYm2sj4O2QN2C0=
google.golang.org/genproto/googleapis/rpc v0.0.0-20260817212433-ac3dfec99bb1 h1:utmqiUzZAEINbLmRyAt1QjVkMyLQ+lvIwCpLaB1rZfw=
google.golang.org/genproto/googleapis/rpc v0.0.0-20260817212433-ac3dfec99bb1/go.mod h1:4Hqkh8ycfw05ld/3BWL7rJOSfebL2Q+DVDeRgYgxUU8=
google.golang.org/grpc v1.85.0 h1:BPBCfuVRQ1qvBhKDOq9uvQllMvO59rKsYhXpp7Dd8vw=
google.golang.org/grpc v1.85.0/go.mod h1:0rQrOD58yjal/0EaVbGBANindixsCZNQPDV3VKtaKuQ=
google.golang.org/grpc/cmd/protoc-gen-go-grpc v1.6.2 h1:rgSNvqscFZ1JgV/4wH5GOsZFSFkR2Eua9As3KIr2LlM=
google.golang.org/grpc/cmd/protoc-gen-go-grpc v1.6.2/go.mod h1:iMEtFwDlAhjDU9L5mY6U1XLwlIId/G3h+QcBHDIvrJ8=
google.golang.org/protobuf v1.36.12 h1:pJOKDDOyeXErUroCihFAd5LQuwXBSpVnKGrj5o/fwxc=
google.golang.org/protobuf v1.36.12/go.mod h1:HTf+CrKn2C3g5S8VImy6tdcUvCska2kB7j23XfzDpco=
gopkg.in/check.v1 v0.0.0-20161208181325-20d25e280405/go.mod h1:Co6ibVJAznAaIkqp8huTwlJQCZ016jof/cbN4VW5Yz0=
+16 -5
View File
@@ -1,10 +1,11 @@
package conf
import (
"encoding/base64"
"strings"
"github.com/xtls/xray-core/common/errors"
"github.com/xtls/xray-core/proxy/freedom"
"github.com/xtls/xray-core/proxy/blackhole"
"google.golang.org/protobuf/proto"
)
@@ -18,14 +19,24 @@ type BlackholeConfig struct {
}
func (v *BlackholeConfig) Build() (proto.Message, error) {
config := new(blackhole.Config)
if v.Response != nil {
switch strings.ToLower(v.Response.Type) {
responseName := strings.ToLower(v.Response.Type)
switch responseName {
case "none", "":
config.Response = &blackhole.Response{Type: "none"}
case "http":
config.Response = &blackhole.Response{Type: "http"}
case "custom":
data, err := base64.StdEncoding.DecodeString(v.Response.CustomResponseData)
if err != nil {
return nil, errors.New("failed to decode custom response data: " + err.Error())
}
config.Response = &blackhole.Response{Type: "custom", CustomResponseData: data}
default:
errors.PrintDeprecatedFeatureWarning(`"blackhole" outbound response`, `the "responder" outbound`)
return (&ResponderConfig{Type: v.Response.Type, Response: v.Response.CustomResponseData}).Build()
return nil, errors.New("unknown blackhole response: " + responseName)
}
}
return &freedom.Config{FinalRules: []*freedom.FinalRuleConfig{{Action: freedom.RuleAction_Block}}}, nil
return config, nil
}
+57
View File
@@ -0,0 +1,57 @@
package conf_test
import (
"testing"
. "github.com/xtls/xray-core/infra/conf"
"github.com/xtls/xray-core/proxy/blackhole"
)
func TestHTTPResponseJSON(t *testing.T) {
creator := func() Buildable {
return new(BlackholeConfig)
}
runMultiTestCase(t, []TestCase{
{
Input: `{
"response": {
"type": "http"
}
}`,
Parser: loadJSON(creator),
Output: &blackhole.Config{
Response: &blackhole.Response{Type: "http"},
},
},
{
Input: `{}`,
Parser: loadJSON(creator),
Output: &blackhole.Config{},
},
})
}
func TestCustomResponseJSON(t *testing.T) {
creator := func() Buildable {
return new(BlackholeConfig)
}
runMultiTestCase(t, []TestCase{
{
Input: `{
"response": {
"type": "custom",
"customResponseData": "Y3VzdG9tIHJlc3BvbnNl"
}
}`,
Parser: loadJSON(creator),
Output: &blackhole.Config{
Response: &blackhole.Response{
Type: "custom",
CustomResponseData: []byte("custom response"),
},
},
},
})
}
+2
View File
@@ -91,6 +91,7 @@ func (c *FreedomConfig) Build() (proto.Message, error) {
}
if c.Fragment != nil {
errors.PrintDeprecatedFeatureWarning(`"fragment" in Freedom`, `"fragment" in "streamSettings.finalmask.tcp"`)
config.Fragment = new(freedom.Fragment)
switch strings.ToLower(c.Fragment.Packets) {
@@ -147,6 +148,7 @@ func (c *FreedomConfig) Build() (proto.Message, error) {
}
if c.Noises != nil {
errors.PrintDeprecatedFeatureWarning(`"noises" in Freedom`, `"noise" in "streamSettings.finalmask.udp"`)
for _, n := range c.Noises {
NConfig, err := ParseNoise(n)
if err != nil {
-4
View File
@@ -6,7 +6,6 @@ import (
"github.com/robfig/cron/v3"
"github.com/xtls/xray-core/app/geodata"
"github.com/xtls/xray-core/common/errors"
"github.com/xtls/xray-core/common/platform/filesystem"
"google.golang.org/protobuf/proto"
)
@@ -19,9 +18,6 @@ func (c *GeodataAssetConfig) Build() (*geodata.Asset, error) {
if err := validateHTTPS(c.URL); err != nil {
return nil, errors.New("invalid geodata asset url: ", c.URL).Base(err)
}
if _, err := filesystem.StatAsset(c.File); err != nil {
return nil, errors.New("invalid geodata asset file: ", c.File).Base(err)
}
return &geodata.Asset{
Url: c.URL,
File: c.File,
-23
View File
@@ -1,7 +1,6 @@
package conf_test
import (
"path/filepath"
"testing"
"github.com/xtls/xray-core/app/geodata"
@@ -9,8 +8,6 @@ import (
)
func TestGeodataConfig(t *testing.T) {
t.Setenv("xray.location.asset", filepath.Join("..", "..", "resources"))
creator := func() Buildable {
return new(GeodataConfig)
}
@@ -38,27 +35,7 @@ func TestGeodataConfig(t *testing.T) {
})
}
func TestGeodataAssetConfig(t *testing.T) {
t.Setenv("xray.location.asset", filepath.Join("..", "..", "resources"))
if _, err := (&GeodataAssetConfig{
URL: "https://example.com/geoip.dat",
File: "geoip.dat",
}).Build(); err != nil {
t.Fatal(err)
}
if _, err := (&GeodataAssetConfig{
URL: "https://example.com/geoip.dat",
File: "missing.dat",
}).Build(); err == nil {
t.Fatal("expected error")
}
}
func TestGeodataAssetConfigInvalidURL(t *testing.T) {
t.Setenv("xray.location.asset", filepath.Join("..", "..", "resources"))
for _, rawURL := range []string{
"",
"http://example.com/geoip.dat",
-46
View File
@@ -1,46 +0,0 @@
package conf
import (
"bytes"
"encoding/base64"
"net/http"
"strings"
"github.com/xtls/xray-core/common"
"github.com/xtls/xray-core/common/errors"
"github.com/xtls/xray-core/proxy/responder"
"google.golang.org/protobuf/proto"
)
type ResponderConfig struct {
Type string `json:"type"`
Response string `json:"response"`
}
func (c *ResponderConfig) Build() (proto.Message, error) {
config := new(responder.Config)
switch strings.ToLower(c.Type) {
case "http":
response := http.Response{
StatusCode: 403,
ProtoMajor: 1,
ProtoMinor: 1,
Header: http.Header{
"Connection": {"close"},
"Cache-Control": {"max-age=3600, public"},
},
}
var data bytes.Buffer
common.Must(response.Write(&data))
config.Response = data.Bytes()
case "custom":
data, err := base64.StdEncoding.DecodeString(c.Response)
if err != nil {
return nil, errors.New("failed to decode response").Base(err)
}
config.Response = data
default:
return nil, errors.New("unknown responder response type: ", c.Type)
}
return config, nil
}
-65
View File
@@ -1,65 +0,0 @@
package conf_test
import (
"encoding/json"
"testing"
"github.com/xtls/xray-core/app/proxyman"
"github.com/xtls/xray-core/common/serial"
"github.com/xtls/xray-core/core"
. "github.com/xtls/xray-core/infra/conf"
"github.com/xtls/xray-core/proxy/responder"
"google.golang.org/protobuf/proto"
)
func TestResponderConfig(t *testing.T) {
parser := loadJSON(func() Buildable { return new(ResponderConfig) })
httpResponse := []byte("HTTP/1.1 403 Forbidden\r\n" +
"Cache-Control: max-age=3600, public\r\n" +
"Connection: close\r\n" +
"Content-Length: 0\r\n\r\n")
runMultiTestCase(t, []TestCase{
{Input: `{"type":"http"}`, Parser: parser, Output: &responder.Config{Response: httpResponse}},
{Input: `{"type":"HtTp"}`, Parser: parser, Output: &responder.Config{Response: httpResponse}},
{Input: `{"type":"custom","response":"aGVsbG8="}`, Parser: parser, Output: &responder.Config{Response: []byte("hello")}},
{Input: `{"type":"CuStOm","response":"aGVsbG8="}`, Parser: parser, Output: &responder.Config{Response: []byte("hello")}},
{Input: `{"type":"custom","response":"AP+A"}`, Parser: parser, Output: &responder.Config{Response: []byte{0, 255, 128}}},
{Input: `{"type":"custom","response":""}`, Parser: parser, Output: &responder.Config{}},
{Input: `{"type":"custom"}`, Parser: parser, Output: &responder.Config{}},
{
Input: `{
"protocol": "ReSpOnDeR",
"tag": "reply",
"settings": {"type": "custom", "response": "aGVsbG8="}
}`,
Parser: func(s string) (proto.Message, error) {
var config OutboundDetourConfig
if err := json.Unmarshal([]byte(s), &config); err != nil {
return nil, err
}
return config.Build()
},
Output: &core.OutboundHandlerConfig{
Tag: "reply",
SenderSettings: serial.ToTypedMessage(&proxyman.SenderConfig{}),
ProxySettings: serial.ToTypedMessage(&responder.Config{Response: []byte("hello")}),
},
},
})
}
func TestResponderConfigErrors(t *testing.T) {
parser := loadJSON(func() Buildable { return new(ResponderConfig) })
for _, input := range []string{
`{}`,
`{"type":""}`,
`{"type":"unknown"}`,
`{"type":"none"}`,
`{"type":"custom","response":"!"}`,
} {
if _, err := parser(input); err == nil {
t.Fatalf("expected error for %s", input)
}
}
}
+26 -1
View File
@@ -293,6 +293,7 @@ type SplitHTTPConfig struct {
ServerMaxHeaderBytes int32 `json:"serverMaxHeaderBytes"`
Xmux XmuxConfig `json:"xmux"`
DownloadSettings *StreamConfig `json:"downloadSettings"`
H2Params json.RawMessage `json:"h2Params"`
Extra json.RawMessage `json:"extra"`
}
@@ -495,6 +496,7 @@ func (c *SplitHTTPConfig) Build() (proto.Message, error) {
ServerMaxHeaderBytes: c.ServerMaxHeaderBytes,
SessionIDTable: c.SessionIDTable,
SessionIDLength: newRangeConfig(c.SessionIDLength),
H2Params: c.H2Params,
Xmux: &splithttp.XmuxConfig{
MaxConcurrency: newRangeConfig(c.Xmux.MaxConcurrency),
MaxConnections: newRangeConfig(c.Xmux.MaxConnections),
@@ -997,12 +999,20 @@ type XDriveConfig struct {
EagerWindowMs uint32 `json:"eagerWindowMs"`
HoleTimeoutMs uint32 `json:"holeTimeoutMs"`
Template json.RawMessage `json:"template"`
S3 *XDriveS3Config `json:"s3"`
Xmux XmuxConfig `json:"xmux"`
// set by StreamConfig when "alpn" is ["h3"]
h3 bool
}
type XDriveS3Config struct {
Endpoint string `json:"endpoint"`
Region string `json:"region"`
Bucket string `json:"bucket"`
PathStyle *bool `json:"pathStyle"`
}
// Build implements Buildable.
func (c *XDriveConfig) Build() (proto.Message, error) {
switch c.Service {
@@ -1019,8 +1029,12 @@ func (c *XDriveConfig) Build() (proto.Message, error) {
if len(c.Template) == 0 {
return nil, errors.New(`service "template" needs a "template" object`)
}
case "s3":
if c.S3 == nil {
return nil, errors.New(`service "s3" needs an "s3" object`)
}
default:
return nil, errors.New(`unknown "service": "`, c.Service, `", use "google-drive", "template" or "local"`)
return nil, errors.New(`unknown "service": "`, c.Service, `", use "google-drive", "template", "s3" or "local"`)
}
if c.Xmux.MaxConnections.To > 0 && c.Xmux.MaxConcurrency.To > 0 {
return nil, errors.New("maxConnections cannot be specified together with maxConcurrency")
@@ -1059,5 +1073,16 @@ func (c *XDriveConfig) Build() (proto.Message, error) {
HKeepAlivePeriod: c.Xmux.HKeepAlivePeriod,
},
}
if c.Service == "s3" {
config.S3 = &xdrive.S3Config{
Endpoint: c.S3.Endpoint,
Region: c.S3.Region,
Bucket: c.S3.Bucket,
PathStyle: c.S3.PathStyle == nil || *c.S3.PathStyle,
}
if err := xdrive.ValidateS3Config(config); err != nil {
return nil, err
}
}
return config, nil
}
+1 -1
View File
@@ -324,7 +324,7 @@ func TestXDriveRejectsUnknownService(t *testing.T) {
if err := json.Unmarshal([]byte(`{"remoteFolder": "/tmp/xdrive", "service": "Dropbox"}`), config); err != nil {
t.Fatalf("Unmarshal: %v", err)
}
if _, err := config.Build(); err == nil || !strings.Contains(err.Error(), `use "google-drive", "template" or "local"`) {
if _, err := config.Build(); err == nil || !strings.Contains(err.Error(), `use "google-drive", "template", "s3" or "local"`) {
t.Fatalf("expected an unknown service error, got %v", err)
}
}
+10 -15
View File
@@ -6,9 +6,7 @@ import (
"math/big"
"net"
"runtime"
"slices"
"strconv"
"strings"
"github.com/xtls/xray-core/common/errors"
"github.com/xtls/xray-core/proxy/tun"
@@ -39,25 +37,22 @@ func (v *TunConfig) Build() (proto.Message, error) {
AutoSystemRoutingTable: v.AutoSystemRoutingTable,
AutoSystemDnsToGateway: v.AutoSystemDnsToGateway,
}
for _, leak := range v.AutoSystemWfpBlockLeak {
switch leak := strings.ToLower(leak); leak {
case "dns", "misconfigtun":
config.AutoSystemWfpBlockLeak = append(config.AutoSystemWfpBlockLeak, leak)
default:
return nil, errors.New("unknown autoSystemWfpBlockLeak value: ", leak)
}
leaks, err := tun.ExpandWfpBlockLeak(v.AutoSystemWfpBlockLeak)
if err != nil {
return nil, err
}
config.AutoSystemWfpBlockLeak = leaks
// Each option needs other settings on the system it takes effect on: the
// filters go along with the routes of autoSystemRoutingTable, "dns" lets
// DNS through the TUN only, and autoSystemDnsToGateway points the system
// DNS at the gateway.
// filters go along with the routes of autoSystemRoutingTable, keeping the
// system's DNS inside the TUN needs DNS servers on it, and
// autoSystemDnsToGateway points the system DNS at the gateway.
switch runtime.GOOS {
case "windows":
if len(config.AutoSystemWfpBlockLeak) > 0 && len(v.AutoSystemRoutingTable) == 0 {
if len(leaks) > 0 && len(v.AutoSystemRoutingTable) == 0 {
return nil, errors.New("autoSystemWfpBlockLeak needs autoSystemRoutingTable to be set")
}
if slices.Contains(config.AutoSystemWfpBlockLeak, "dns") && len(v.DNS) == 0 {
return nil, errors.New(`autoSystemWfpBlockLeak "dns" needs dns to be set`)
if tun.BlocksSystemDNS(leaks) && len(v.DNS) == 0 {
return nil, errors.New(`autoSystemWfpBlockLeak "dns", "udp/53", "tcp/53" or "windnsclient" needs dns to be set`)
}
case "linux", "freebsd":
if v.AutoSystemDnsToGateway && len(v.Gateway) == 0 {
+18 -8
View File
@@ -29,12 +29,17 @@ func TestTunConfigAutoSystem(t *testing.T) {
{
Input: `{"name": "xray0", "dns": ["1.1.1.1"], "autoSystemRoutingTable": ["0.0.0.0/0"], "autoSystemWfpBlockLeak": ["dns", "misconfigtun"]}`,
Parser: loadJSON(creator),
Output: &tun.Config{Name: "xray0", Desc: "Wintun", MTU: 1500, DNS: []string{"1.1.1.1"}, AutoSystemRoutingTable: []string{"0.0.0.0/0"}, AutoOutboundsInterface: "auto", AutoSystemWfpBlockLeak: []string{"dns", "misconfigtun"}},
Output: &tun.Config{Name: "xray0", Desc: "Wintun", MTU: 1500, DNS: []string{"1.1.1.1"}, AutoSystemRoutingTable: []string{"0.0.0.0/0"}, AutoOutboundsInterface: "auto", AutoSystemWfpBlockLeak: []string{"udp/53", "tcp/53", "windnsclient", "tcp/853", "udp/853", "misconfigtun"}},
},
{
Input: `{"name": "xray0", "dns": ["1.1.1.1"], "autoSystemRoutingTable": ["0.0.0.0/0"], "autoSystemWfpBlockLeak": ["DNS"]}`,
Parser: loadJSON(creator),
Output: &tun.Config{Name: "xray0", Desc: "Wintun", MTU: 1500, DNS: []string{"1.1.1.1"}, AutoSystemRoutingTable: []string{"0.0.0.0/0"}, AutoOutboundsInterface: "auto", AutoSystemWfpBlockLeak: []string{"dns"}},
Output: &tun.Config{Name: "xray0", Desc: "Wintun", MTU: 1500, DNS: []string{"1.1.1.1"}, AutoSystemRoutingTable: []string{"0.0.0.0/0"}, AutoOutboundsInterface: "auto", AutoSystemWfpBlockLeak: []string{"udp/53", "tcp/53", "windnsclient", "tcp/853", "udp/853"}},
},
{
Input: `{"name": "xray0", "autoSystemRoutingTable": ["0.0.0.0/0"], "autoSystemWfpBlockLeak": ["TCP/853", "udp/853", "tcp/0853"]}`,
Parser: loadJSON(creator),
Output: &tun.Config{Name: "xray0", Desc: "Wintun", MTU: 1500, AutoSystemRoutingTable: []string{"0.0.0.0/0"}, AutoOutboundsInterface: "auto", AutoSystemWfpBlockLeak: []string{"tcp/853", "udp/853"}},
},
})
}
@@ -49,6 +54,9 @@ func TestTunConfigAutoSystemNeeds(t *testing.T) {
{`{"name": "xray0", "autoSystemWfpBlockLeak": ["misconfigtun"]}`, []string{"windows"}},
{`{"name": "xray0", "autoSystemRoutingTable": ["0.0.0.0/0"], "autoSystemWfpBlockLeak": ["misconfigtun"]}`, nil},
{`{"name": "xray0", "autoSystemRoutingTable": ["0.0.0.0/0"], "autoSystemWfpBlockLeak": ["dns"]}`, []string{"windows"}},
{`{"name": "xray0", "autoSystemRoutingTable": ["0.0.0.0/0"], "autoSystemWfpBlockLeak": ["udp/53"]}`, []string{"windows"}},
{`{"name": "xray0", "autoSystemRoutingTable": ["0.0.0.0/0"], "autoSystemWfpBlockLeak": ["windnsclient"]}`, []string{"windows"}},
{`{"name": "xray0", "autoSystemRoutingTable": ["0.0.0.0/0"], "autoSystemWfpBlockLeak": ["tcp/853", "udp/853"]}`, nil},
{`{"name": "xray0", "autoSystemDnsToGateway": true}`, []string{"linux", "freebsd"}},
} {
config := new(TunConfig)
@@ -62,11 +70,13 @@ func TestTunConfigAutoSystemNeeds(t *testing.T) {
}
func TestTunConfigAutoSystemWfpBlockLeakUnknown(t *testing.T) {
config := new(TunConfig)
if err := json.Unmarshal([]byte(`{"name": "xray0", "autoSystemWfpBlockLeak": ["dns", "ip"]}`), config); err != nil {
t.Fatal(err)
}
if _, err := config.Build(); err == nil {
t.Error("an unknown autoSystemWfpBlockLeak value was accepted")
for _, value := range []string{"ip", "tcp/0", "icmp/1"} {
config := new(TunConfig)
if err := json.Unmarshal([]byte(`{"name": "xray0", "autoSystemWfpBlockLeak": ["dns", "`+value+`"]}`), config); err != nil {
t.Fatal(err)
}
if _, err := config.Build(); err == nil {
t.Errorf("autoSystemWfpBlockLeak value %q was accepted", value)
}
}
}
+6 -4
View File
@@ -45,7 +45,6 @@ var (
"block": func() interface{} { return new(BlackholeConfig) },
"blackhole": func() interface{} { return new(BlackholeConfig) },
"loopback": func() interface{} { return new(LoopbackConfig) },
"responder": func() interface{} { return new(ResponderConfig) },
"direct": func() interface{} { return new(FreedomConfig) },
"freedom": func() interface{} { return new(FreedomConfig) },
"http": func() interface{} { return new(HTTPClientConfig) },
@@ -238,10 +237,11 @@ type OutboundDetourConfig struct {
func requiresTransportSecurity(address *Address) bool {
if address == nil || address.Address == nil {
return false
return true
}
if address.Family().IsIP() {
return !geodata.GetPrivateIPMatcher().Match(address.IP())
ip := address.IP()
return !ip.IsPrivate() && !ip.IsLoopback() && !ip.IsLinkLocalUnicast()
}
domain := strings.TrimSuffix(strings.ToLower(address.Domain()), ".")
return !geodata.GetPrivateDomainMatcher().MatchAny(domain)
@@ -609,7 +609,6 @@ func (c *Config) Build() (*core.Config, error) {
config := &core.Config{
App: []*serial.TypedMessage{
serial.ToTypedMessage(&dispatcher.Config{}),
serial.ToTypedMessage(&proxyman.InboundConfig{}),
serial.ToTypedMessage(&proxyman.OutboundConfig{}),
},
}
@@ -719,6 +718,9 @@ func (c *Config) Build() (*core.Config, error) {
config.App = append(config.App, serial.ToTypedMessage(r))
}
// Initialize the inbound module last to ensure inbound connections are handled correctly.
config.App = append(config.App, serial.ToTypedMessage(&proxyman.InboundConfig{}))
var inbounds []InboundDetourConfig
if len(c.InboundConfigs) > 0 {
+1 -1
View File
@@ -90,7 +90,6 @@ func TestXrayConfig(t *testing.T) {
AccessLogPath: "/var/log/xray/access.log",
}),
serial.ToTypedMessage(&dispatcher.Config{}),
serial.ToTypedMessage(&proxyman.InboundConfig{}),
serial.ToTypedMessage(&proxyman.OutboundConfig{}),
serial.ToTypedMessage(&router.Config{
DomainStrategy: router.Config_AsIs,
@@ -111,6 +110,7 @@ func TestXrayConfig(t *testing.T) {
},
},
}),
serial.ToTypedMessage(&proxyman.InboundConfig{}),
},
Inbound: []*core.InboundHandlerConfig{
{
+174 -197
View File
@@ -1,149 +1,87 @@
package main
import (
"errors"
"bytes"
"context"
"flag"
"fmt"
"go/build"
"io"
"net/http"
"io/fs"
"os"
"os/exec"
"path/filepath"
"regexp"
"runtime"
"strconv"
"strings"
"github.com/bufbuild/protocompile"
"google.golang.org/protobuf/proto"
"google.golang.org/protobuf/reflect/protodesc"
"google.golang.org/protobuf/reflect/protoreflect"
"google.golang.org/protobuf/types/descriptorpb"
"google.golang.org/protobuf/types/pluginpb"
)
var directory = flag.String("pwd", "", "Working directory of Xray vprotogen.")
var (
directory = flag.String("pwd", "", "Working directory of Xray vprotogen.")
mode = flag.String("mode", "generate", "Execution mode. 'generate' (default) compiles and saves changes. 'check' reports out-of-date files and exits with non-zero.")
)
// envFile returns the name of the Go environment configuration file.
// Copy from https://github.com/golang/go/blob/c4f2a9788a7be04daf931ac54382fbe2cb754938/src/cmd/go/internal/cfg/cfg.go#L150-L166
func envFile() (string, error) {
if file := os.Getenv("GOENV"); file != "" {
if file == "off" {
return "", errors.New("GOENV=off")
// topoSort sorts file descriptors so each dependency appears before files importing it.
func topoSort(files []protoreflect.FileDescriptor) []*descriptorpb.FileDescriptorProto {
fileMap := make(map[string]protoreflect.FileDescriptor)
for _, f := range files {
fileMap[f.Path()] = f
}
visited := make(map[string]bool)
var sorted []*descriptorpb.FileDescriptorProto
var visit func(fd protoreflect.FileDescriptor)
visit = func(fd protoreflect.FileDescriptor) {
if visited[fd.Path()] {
return
}
return file, nil
}
dir, err := os.UserConfigDir()
if err != nil {
return "", err
}
if dir == "" {
return "", errors.New("missing user-config dir")
}
return filepath.Join(dir, "go", "env"), nil
}
visited[fd.Path()] = true
// GetRuntimeEnv returns the value of runtime environment variable,
// that is set by running following command: `go env -w key=value`.
func GetRuntimeEnv(key string) (string, error) {
file, err := envFile()
if err != nil {
return "", err
}
if file == "" {
return "", errors.New("missing runtime env file")
}
var data []byte
var runtimeEnv string
data, readErr := os.ReadFile(file)
if readErr != nil {
return "", readErr
}
envStrings := strings.Split(string(data), "\n")
for _, envItem := range envStrings {
envItem = strings.TrimSuffix(envItem, "\r")
envKeyValue := strings.Split(envItem, "=")
if strings.EqualFold(strings.TrimSpace(envKeyValue[0]), key) {
runtimeEnv = strings.TrimSpace(envKeyValue[1])
imports := fd.Imports()
for i := 0; i < imports.Len(); i++ {
if dep, ok := fileMap[imports.Get(i).Path()]; ok {
visit(dep)
}
}
sorted = append(sorted, protodesc.ToFileDescriptorProto(fd))
}
return runtimeEnv, nil
for _, f := range files {
visit(f)
}
return sorted
}
// GetGOBIN returns GOBIN environment variable as a string. It will NOT be empty.
func GetGOBIN() string {
// The one set by user explicitly by `export GOBIN=/path` or `env GOBIN=/path command`
GOBIN := os.Getenv("GOBIN")
if GOBIN == "" {
var err error
// The one set by user by running `go env -w GOBIN=/path`
GOBIN, err = GetRuntimeEnv("GOBIN")
if err != nil {
// The default one that Golang uses
return filepath.Join(build.Default.GOPATH, "bin")
}
if GOBIN == "" {
return filepath.Join(build.Default.GOPATH, "bin")
}
return GOBIN
}
return GOBIN
}
func whichProtoc(suffix, targetedVersion string) (string, error) {
protoc := "protoc" + suffix
path, err := exec.LookPath(protoc)
func runPlugin(pluginName, pwd string, req *pluginpb.CodeGeneratorRequest) (*pluginpb.CodeGeneratorResponse, error) {
reqBytes, err := proto.Marshal(req)
if err != nil {
return "", fmt.Errorf(`
Command "%s" not found.
Make sure that %s is in your system path or current path.
Download %s v%s or later from https://github.com/protocolbuffers/protobuf/releases
`, protoc, protoc, protoc, targetedVersion)
return nil, err
}
return path, nil
}
func getProjectProtocVersion(url string) (string, error) {
resp, err := http.Get(url)
if err != nil {
return "", errors.New("can not get the version of protobuf used in xray project")
}
defer resp.Body.Close()
body, err := io.ReadAll(resp.Body)
if err != nil {
return "", errors.New("can not read from body")
}
versionRegexp := regexp.MustCompile(`\/\/\s*protoc\s*v\d+\.(\d+\.\d+)`)
matched := versionRegexp.FindStringSubmatch(string(body))
return matched[1], nil
}
cmd := exec.Command("go", "tool", pluginName)
cmd.Dir = pwd
cmd.Stdin = bytes.NewReader(reqBytes)
cmd.Env = os.Environ()
var stdout, stderr bytes.Buffer
cmd.Stdout = &stdout
cmd.Stderr = &stderr
func getInstalledProtocVersion(protocPath string) (string, error) {
cmd := exec.Command(protocPath, "--version")
cmd.Env = append(cmd.Env, os.Environ()...)
output, cmdErr := cmd.CombinedOutput()
if cmdErr != nil {
return "", cmdErr
if err := cmd.Run(); err != nil {
return nil, fmt.Errorf("%v: %s", err, stderr.String())
}
versionRegexp := regexp.MustCompile(`protoc\s*(\d+\.\d+)`)
matched := versionRegexp.FindStringSubmatch(string(output))
return matched[1], nil
}
func parseVersion(s string, width int) int64 {
strList := strings.Split(s, ".")
format := fmt.Sprintf("%%s%%0%ds", width)
v := ""
for _, value := range strList {
v = fmt.Sprintf(format, v, value)
var resp pluginpb.CodeGeneratorResponse
if err := proto.Unmarshal(stdout.Bytes(), &resp); err != nil {
return nil, fmt.Errorf("failed to unmarshal response: %w", err)
}
var result int64
var err error
if result, err = strconv.ParseInt(v, 10, 64); err != nil {
return 0
if resp.GetError() != "" {
return nil, fmt.Errorf("%s", resp.GetError())
}
return result
}
func needToUpdate(targetedVersion, installedVersion string) bool {
vt := parseVersion(targetedVersion, 4)
vi := parseVersion(installedVersion, 4)
return vt > vi
return &resp, nil
}
func main() {
@@ -154,106 +92,145 @@ func main() {
flag.Parse()
if !filepath.IsAbs(*directory) {
pwd, wdErr := os.Getwd()
if wdErr != nil {
pwd, err := os.Getwd()
if err != nil {
fmt.Println("Can not get current working directory.")
os.Exit(1)
}
*directory = filepath.Join(pwd, *directory)
}
pwd := *directory
GOBIN := GetGOBIN()
binPath := os.Getenv("PATH")
pathSlice := []string{pwd, GOBIN, binPath}
binPath = strings.Join(pathSlice, string(os.PathListSeparator))
os.Setenv("PATH", binPath)
suffix := ""
if runtime.GOOS == "windows" {
suffix = ".exe"
}
/*
targetedVersion, err := getProjectProtocVersion("https://raw.githubusercontent.com/XTLS/Xray-core/HEAD/core/config.pb.go")
if err != nil {
fmt.Println(err)
os.Exit(1)
}
*/
targetedVersion := ""
protoc, err := whichProtoc(suffix, targetedVersion)
if err != nil {
fmt.Println(err)
isCheck := false
switch *mode {
case "generate", "":
isCheck = false
case "check":
isCheck = true
default:
fmt.Fprintf(os.Stderr, "Unrecognized 'mode': %s. Use 'generate' or 'check'.\n", *mode)
os.Exit(1)
}
installedVersion, err := getInstalledProtocVersion(protoc)
if err != nil {
fmt.Println(err)
os.Exit(1)
if isCheck {
fmt.Println("Checking for out-of-date Protobuf generated files...")
}
if needToUpdate(targetedVersion, installedVersion) {
fmt.Printf(`
You are using an old protobuf version, please update to v%s or later.
Download it from https://github.com/protocolbuffers/protobuf/releases
* Protobuf version used in xray project: v%s
* Protobuf version you have installed: v%s
`, targetedVersion, targetedVersion, installedVersion)
os.Exit(1)
}
protoFilesMap := make(map[string][]string)
walkErr := filepath.Walk(pwd, func(path string, info os.FileInfo, err error) error {
if err != nil {
fmt.Println(err)
var protoFiles []string
var existingPbFiles []string
err := filepath.WalkDir(pwd, func(path string, d fs.DirEntry, err error) error {
if err != nil || d.IsDir() {
return err
}
if info.IsDir() {
return nil
if strings.HasSuffix(d.Name(), ".proto") {
rel, _ := filepath.Rel(pwd, path)
protoFiles = append(protoFiles, filepath.ToSlash(rel))
}
dir := filepath.Dir(path)
filename := filepath.Base(path)
if strings.HasSuffix(filename, ".proto") {
path = path[len(pwd)+1:]
protoFilesMap[dir] = append(protoFilesMap[dir], path)
if strings.HasSuffix(d.Name(), ".pb.go") {
existingPbFiles = append(existingPbFiles, path)
}
return nil
})
if walkErr != nil {
fmt.Println(walkErr)
if err != nil {
fmt.Println("Walk error:", err)
os.Exit(1)
}
for _, files := range protoFilesMap {
for _, relProtoFile := range files {
args := []string{
"--go_out", pwd,
"--go_opt", "paths=source_relative",
"--go-grpc_out", pwd,
"--go-grpc_opt", "paths=source_relative",
"--plugin", "protoc-gen-go=" + filepath.Join(GOBIN, "protoc-gen-go"+suffix),
"--plugin", "protoc-gen-go-grpc=" + filepath.Join(GOBIN, "protoc-gen-go-grpc"+suffix),
compiler := protocompile.Compiler{
Resolver: protocompile.WithStandardImports(&protocompile.SourceResolver{
ImportPaths: []string{pwd},
}),
SourceInfoMode: protocompile.SourceInfoStandard,
}
linkedFiles, err := compiler.Compile(context.Background(), protoFiles...)
if err != nil {
fmt.Fprintf(os.Stderr, "Protobuf compilation failed:\n%v\n", err)
os.Exit(1)
}
var fdList []protoreflect.FileDescriptor
for _, f := range linkedFiles {
fdList = append(fdList, f)
}
req := &pluginpb.CodeGeneratorRequest{
FileToGenerate: protoFiles,
Parameter: new("paths=source_relative"),
ProtoFile: topoSort(fdList),
}
var diffCount int
generatedFiles := make(map[string]struct{})
for _, plugin := range []string{"protoc-gen-go", "protoc-gen-go-grpc"} {
resp, err := runPlugin(plugin, pwd, req)
if err != nil {
fmt.Fprintf(os.Stderr, "%s failed: %v\n", plugin, err)
os.Exit(1)
}
for _, f := range resp.File {
targetPath := filepath.Join(pwd, filepath.FromSlash(f.GetName()))
generatedFiles[targetPath] = struct{}{}
content := []byte(f.GetContent())
hasDiff := false
existing, err := os.ReadFile(targetPath)
if err != nil {
hasDiff = true
} else {
oldNorm := bytes.ReplaceAll(existing, []byte("\r\n"), []byte("\n"))
newNorm := bytes.ReplaceAll(content, []byte("\r\n"), []byte("\n"))
if !bytes.Equal(oldNorm, newNorm) {
hasDiff = true
}
}
args = append(args, relProtoFile)
cmd := exec.Command(protoc, args...)
cmd.Env = append(cmd.Env, os.Environ()...)
cmd.Dir = pwd
output, cmdErr := cmd.CombinedOutput()
if len(output) > 0 {
fmt.Println(string(output))
}
if cmdErr != nil {
fmt.Println(cmdErr)
os.Exit(1)
if hasDiff {
diffCount++
fmt.Println(targetPath)
if isCheck {
continue
}
if err := os.MkdirAll(filepath.Dir(targetPath), 0o755); err != nil {
fmt.Fprintf(os.Stderr, "Error creating directory: %v\n", err)
os.Exit(1)
}
mode := os.FileMode(0o644)
if stat, err := os.Stat(targetPath); err == nil {
mode = stat.Mode().Perm()
}
if err := os.WriteFile(targetPath, content, mode); err != nil {
fmt.Fprintf(os.Stderr, "Error writing %s: %v\n", targetPath, err)
os.Exit(1)
}
}
}
}
for _, path := range existingPbFiles {
if _, ok := generatedFiles[path]; !ok {
diffCount++
if isCheck {
fmt.Printf("Orphaned Protobuf file: %s\n", path)
} else {
fmt.Printf("Removing orphaned Protobuf file: %s\n", path)
if err := os.Remove(path); err != nil {
fmt.Fprintf(os.Stderr, "Error removing %s: %v\n", path, err)
os.Exit(1)
}
}
}
}
if isCheck {
if diffCount > 0 {
fmt.Println("Protobuf generated file problem(s) found.")
fmt.Println("Please run 'go run ./infra/vprotogen' to regenerate them.")
os.Exit(1)
}
fmt.Println("All Protobuf generated file check has been passed.")
}
}
+11 -10
View File
@@ -47,18 +47,19 @@ func executeBalancerInfo(cmd *base.Command, args []string) {
conn, ctx, close := dialAPIServer()
defer close()
client := routerService.NewRoutingServiceClient(conn)
r := &routerService.GetBalancerInfoRequest{Tag: unnamedArgs[0]}
resp, err := client.GetBalancerInfo(ctx, r)
if err != nil {
base.Fatalf("failed to get health information: %s", err)
}
for _, tag := range unnamedArgs {
r := &routerService.GetBalancerInfoRequest{Tag: tag}
resp, err := client.GetBalancerInfo(ctx, r)
if err != nil {
base.Fatalf("failed to get health information: %s", err)
}
if apiJSON {
showJSONResponse(resp)
return
if apiJSON {
showJSONResponse(resp)
} else {
showBalancerInfo(resp.Balancer)
}
}
showBalancerInfo(resp.Balancer)
}
func showBalancerInfo(b *routerService.BalancerMsg) {
+2
View File
@@ -92,6 +92,8 @@ func executeAddRules(cmd *base.Command, args []string) {
if err != nil {
base.Fatalf("failed to perform AddRule: %s", err)
}
// if multiple files are specified, use append to merge them instead of overriding previous one
shouldAppend = true
showJSONResponse(resp)
}
}
+4 -11
View File
@@ -3,6 +3,7 @@ package lua
import (
"os"
"path/filepath"
"strings"
xlua "github.com/xtls/xray-core/common/lua"
"github.com/xtls/xray-core/main/commands/base"
@@ -32,14 +33,13 @@ func executeSign(cmd *base.Command, args []string) {
cmd.Usage()
}
if !strings.EqualFold(filepath.Ext(args[0]), ".lua") {
base.Fatalf("Lua file extension must be .lua")
}
info, err := os.Stat(args[0])
if err != nil {
base.Fatalf("failed to inspect Lua file: %s", err)
}
if !info.Mode().IsRegular() {
base.Fatalf("Lua input is not a regular file: %s", args[0])
}
code, err := os.ReadFile(args[0])
if err != nil {
base.Fatalf("failed to read Lua file: %s", err)
@@ -67,14 +67,7 @@ func executeSign(cmd *base.Command, args []string) {
func writeSignedFile(path string, code []byte, mode os.FileMode) error {
if info, err := os.Stat(path); err == nil {
if !info.Mode().IsRegular() {
return &os.PathError{Op: "write", Path: path, Err: os.ErrInvalid}
}
mode = info.Mode().Perm()
path, err = filepath.EvalSymlinks(path)
if err != nil {
return err
}
} else if !os.IsNotExist(err) {
return err
}
+2 -10
View File
@@ -58,18 +58,10 @@ func readConfigFile(file *os.File) ([]byte, error) {
return nil, err
}
if info.Mode().IsRegular() {
path, err := filepath.Abs(file.Name())
if err != nil {
return nil, err
}
path, err = filepath.EvalSymlinks(path)
if err != nil {
return nil, err
}
switch strings.ToLower(filepath.Ext(path)) {
switch strings.ToLower(filepath.Ext(file.Name())) {
case ".jsonc", ".json", ".yml", ".yaml", ".toml", ".pb", ".protobuf":
default:
return nil, errors.New("unsupported config file extension: ", path)
return nil, errors.New("unsupported config file extension: ", file.Name())
}
}
return io.ReadAll(file)
+1 -1
View File
@@ -35,13 +35,13 @@ import (
_ "github.com/xtls/xray-core/app/observatory"
// Inbound and outbound proxies.
_ "github.com/xtls/xray-core/proxy/blackhole"
_ "github.com/xtls/xray-core/proxy/dns"
_ "github.com/xtls/xray-core/proxy/dokodemo"
_ "github.com/xtls/xray-core/proxy/freedom"
_ "github.com/xtls/xray-core/proxy/http"
_ "github.com/xtls/xray-core/proxy/loopback"
_ "github.com/xtls/xray-core/proxy/masque"
_ "github.com/xtls/xray-core/proxy/responder"
_ "github.com/xtls/xray-core/proxy/shadowsocks"
_ "github.com/xtls/xray-core/proxy/socks"
_ "github.com/xtls/xray-core/proxy/trojan"
+88
View File
@@ -0,0 +1,88 @@
// Package blackhole is an outbound handler that blocks all connections.
package blackhole
import (
"bytes"
"context"
"net/http"
"time"
"github.com/xtls/xray-core/common"
"github.com/xtls/xray-core/common/buf"
"github.com/xtls/xray-core/common/dice"
"github.com/xtls/xray-core/common/errors"
"github.com/xtls/xray-core/common/net"
"github.com/xtls/xray-core/common/session"
"github.com/xtls/xray-core/common/signal"
"github.com/xtls/xray-core/transport"
"github.com/xtls/xray-core/transport/internet"
)
// Handler is an outbound connection that silently swallow the entire payload.
type Handler struct {
response []byte
}
var http403response = http.Response{
StatusCode: 403,
ProtoMajor: 1,
ProtoMinor: 1,
Header: http.Header{
"Connection": {"close"},
"Cache-Control": {"max-age=3600, public"},
},
}
// New creates a new blackhole handler.
func New(ctx context.Context, config *Config) (*Handler, error) {
response := []byte{}
if config.Response != nil {
switch config.Response.Type {
case "", "none":
case "http":
var data bytes.Buffer
common.Must(http403response.Write(&data))
response = data.Bytes()
case "custom":
response = config.Response.CustomResponseData
default:
return nil, errors.New("unknown blackhole response: " + config.Response.Type)
}
}
return &Handler{
response: response,
}, nil
}
// Process implements OutboundHandler.Dispatch().
func (h *Handler) Process(ctx context.Context, link *transport.Link, dialer internet.Dialer) error {
outbounds := session.OutboundsFromContext(ctx)
ob := outbounds[len(outbounds)-1]
ob.Name = "blackhole"
if len(h.response) > 0 {
mbc := buf.MultiBufferContainer{}
common.Must2(mbc.Write(h.response))
link.Writer.WriteMultiBuffer(mbc.MultiBuffer)
// Sleep a little here to make sure the response is sent to client.
time.Sleep(time.Second)
}
defer common.Interrupt(link.Writer)
defer common.Interrupt(link.Reader)
// wait to drain all the possible incoming UDP data
if ob.Target.Network == net.Network_UDP {
ctx, cancel := context.WithCancel(ctx)
timer := signal.CancelAfterInactivity(ctx, func() {
cancel()
}, time.Duration(30+dice.Roll(61))*time.Second)
go buf.Copy(link.Reader, buf.Discard, buf.UpdateActivity(timer))
<-ctx.Done()
}
return nil
}
func init() {
common.Must(common.RegisterConfig((*Config)(nil), func(ctx context.Context, config interface{}) (interface{}, error) {
return New(ctx, config.(*Config))
}))
}
+76
View File
@@ -0,0 +1,76 @@
package blackhole_test
import (
"bufio"
"bytes"
"context"
"crypto/rand"
"net/http"
"testing"
"github.com/xtls/xray-core/common"
"github.com/xtls/xray-core/common/buf"
"github.com/xtls/xray-core/common/session"
"github.com/xtls/xray-core/proxy/blackhole"
"github.com/xtls/xray-core/transport"
"github.com/xtls/xray-core/transport/pipe"
)
func TestBlackholeHTTPResponse(t *testing.T) {
ctx := session.ContextWithOutbounds(context.Background(), []*session.Outbound{{}})
handler, err := blackhole.New(ctx, &blackhole.Config{
Response: &blackhole.Response{Type: "http"},
})
common.Must(err)
reader, writer := pipe.New(pipe.WithoutSizeLimit())
dataCh := make(chan buf.MultiBuffer, 1)
go func() {
mb := common.Must2(reader.ReadMultiBuffer())
dataCh <- mb
}()
link := transport.Link{
Reader: reader,
Writer: writer,
}
common.Must(handler.Process(ctx, &link, nil))
mb := <-dataCh
data := make([]byte, mb.Len())
mb.Copy(data)
resp := common.Must2(http.ReadResponse(bufio.NewReader(bytes.NewBuffer(data)), nil))
if resp.StatusCode != 403 {
t.Errorf("expected 403 response, got %d", resp.StatusCode)
}
}
func TestBlackholeCustomResponse(t *testing.T) {
ctx := session.ContextWithOutbounds(context.Background(), []*session.Outbound{{}})
// slightly bigger than a buffer
expected := make([]byte, buf.Size+1000)
if _, err := rand.Read(expected); err != nil {
t.Fatal(err)
}
handler, err := blackhole.New(ctx, &blackhole.Config{
Response: &blackhole.Response{
Type: "custom",
CustomResponseData: expected,
},
})
common.Must(err)
reader, writer := pipe.New(pipe.WithoutSizeLimit())
var actual buf.MultiBuffer
var rerr error
go func() {
actual, rerr = reader.ReadMultiBuffer()
}()
link := transport.Link{Reader: reader, Writer: writer}
common.Must(handler.Process(ctx, &link, nil))
common.Must(rerr)
if actual.String() != string(expected) {
t.Errorf("custom response mismatch")
}
}
+180
View File
@@ -0,0 +1,180 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: proxy/blackhole/config.proto
package blackhole
import (
protoreflect "google.golang.org/protobuf/reflect/protoreflect"
protoimpl "google.golang.org/protobuf/runtime/protoimpl"
reflect "reflect"
sync "sync"
unsafe "unsafe"
)
const (
// Verify that this generated code is sufficiently up-to-date.
_ = protoimpl.EnforceVersion(20 - protoimpl.MinVersion)
// Verify that runtime/protoimpl is sufficiently up-to-date.
_ = protoimpl.EnforceVersion(protoimpl.MaxVersion - 20)
)
type Response struct {
state protoimpl.MessageState `protogen:"open.v1"`
Type string `protobuf:"bytes,1,opt,name=type,proto3" json:"type,omitempty"`
CustomResponseData []byte `protobuf:"bytes,2,opt,name=custom_response_data,json=customResponseData,proto3" json:"custom_response_data,omitempty"`
unknownFields protoimpl.UnknownFields
sizeCache protoimpl.SizeCache
}
func (x *Response) Reset() {
*x = Response{}
mi := &file_proxy_blackhole_config_proto_msgTypes[0]
ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
ms.StoreMessageInfo(mi)
}
func (x *Response) String() string {
return protoimpl.X.MessageStringOf(x)
}
func (*Response) ProtoMessage() {}
func (x *Response) ProtoReflect() protoreflect.Message {
mi := &file_proxy_blackhole_config_proto_msgTypes[0]
if x != nil {
ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
if ms.LoadMessageInfo() == nil {
ms.StoreMessageInfo(mi)
}
return ms
}
return mi.MessageOf(x)
}
// Deprecated: Use Response.ProtoReflect.Descriptor instead.
func (*Response) Descriptor() ([]byte, []int) {
return file_proxy_blackhole_config_proto_rawDescGZIP(), []int{0}
}
func (x *Response) GetType() string {
if x != nil {
return x.Type
}
return ""
}
func (x *Response) GetCustomResponseData() []byte {
if x != nil {
return x.CustomResponseData
}
return nil
}
type Config struct {
state protoimpl.MessageState `protogen:"open.v1"`
Response *Response `protobuf:"bytes,1,opt,name=response,proto3" json:"response,omitempty"`
unknownFields protoimpl.UnknownFields
sizeCache protoimpl.SizeCache
}
func (x *Config) Reset() {
*x = Config{}
mi := &file_proxy_blackhole_config_proto_msgTypes[1]
ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
ms.StoreMessageInfo(mi)
}
func (x *Config) String() string {
return protoimpl.X.MessageStringOf(x)
}
func (*Config) ProtoMessage() {}
func (x *Config) ProtoReflect() protoreflect.Message {
mi := &file_proxy_blackhole_config_proto_msgTypes[1]
if x != nil {
ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
if ms.LoadMessageInfo() == nil {
ms.StoreMessageInfo(mi)
}
return ms
}
return mi.MessageOf(x)
}
// Deprecated: Use Config.ProtoReflect.Descriptor instead.
func (*Config) Descriptor() ([]byte, []int) {
return file_proxy_blackhole_config_proto_rawDescGZIP(), []int{1}
}
func (x *Config) GetResponse() *Response {
if x != nil {
return x.Response
}
return nil
}
var File_proxy_blackhole_config_proto protoreflect.FileDescriptor
const file_proxy_blackhole_config_proto_rawDesc = "" +
"\n" +
"\x1cproxy/blackhole/config.proto\x12\x14xray.proxy.blackhole\"P\n" +
"\bResponse\x12\x12\n" +
"\x04type\x18\x01 \x01(\tR\x04type\x120\n" +
"\x14custom_response_data\x18\x02 \x01(\fR\x12customResponseData\"D\n" +
"\x06Config\x12:\n" +
"\bresponse\x18\x01 \x01(\v2\x1e.xray.proxy.blackhole.ResponseR\bresponseB^\n" +
"\x18com.xray.proxy.blackholeP\x01Z)github.com/xtls/xray-core/proxy/blackhole\xaa\x02\x14Xray.Proxy.Blackholeb\x06proto3"
var (
file_proxy_blackhole_config_proto_rawDescOnce sync.Once
file_proxy_blackhole_config_proto_rawDescData []byte
)
func file_proxy_blackhole_config_proto_rawDescGZIP() []byte {
file_proxy_blackhole_config_proto_rawDescOnce.Do(func() {
file_proxy_blackhole_config_proto_rawDescData = protoimpl.X.CompressGZIP(unsafe.Slice(unsafe.StringData(file_proxy_blackhole_config_proto_rawDesc), len(file_proxy_blackhole_config_proto_rawDesc)))
})
return file_proxy_blackhole_config_proto_rawDescData
}
var file_proxy_blackhole_config_proto_msgTypes = make([]protoimpl.MessageInfo, 2)
var file_proxy_blackhole_config_proto_goTypes = []any{
(*Response)(nil), // 0: xray.proxy.blackhole.Response
(*Config)(nil), // 1: xray.proxy.blackhole.Config
}
var file_proxy_blackhole_config_proto_depIdxs = []int32{
0, // 0: xray.proxy.blackhole.Config.response:type_name -> xray.proxy.blackhole.Response
1, // [1:1] is the sub-list for method output_type
1, // [1:1] is the sub-list for method input_type
1, // [1:1] is the sub-list for extension type_name
1, // [1:1] is the sub-list for extension extendee
0, // [0:1] is the sub-list for field type_name
}
func init() { file_proxy_blackhole_config_proto_init() }
func file_proxy_blackhole_config_proto_init() {
if File_proxy_blackhole_config_proto != nil {
return
}
type x struct{}
out := protoimpl.TypeBuilder{
File: protoimpl.DescBuilder{
GoPackagePath: reflect.TypeOf(x{}).PkgPath(),
RawDescriptor: unsafe.Slice(unsafe.StringData(file_proxy_blackhole_config_proto_rawDesc), len(file_proxy_blackhole_config_proto_rawDesc)),
NumEnums: 0,
NumMessages: 2,
NumExtensions: 0,
NumServices: 0,
},
GoTypes: file_proxy_blackhole_config_proto_goTypes,
DependencyIndexes: file_proxy_blackhole_config_proto_depIdxs,
MessageInfos: file_proxy_blackhole_config_proto_msgTypes,
}.Build()
File_proxy_blackhole_config_proto = out.File
file_proxy_blackhole_config_proto_goTypes = nil
file_proxy_blackhole_config_proto_depIdxs = nil
}
+16
View File
@@ -0,0 +1,16 @@
syntax = "proto3";
package xray.proxy.blackhole;
option csharp_namespace = "Xray.Proxy.Blackhole";
option go_package = "github.com/xtls/xray-core/proxy/blackhole";
option java_package = "com.xray.proxy.blackhole";
option java_multiple_files = true;
message Response {
string type = 1;
bytes custom_response_data = 2;
}
message Config {
Response response = 1;
}
+19
View File
@@ -0,0 +1,19 @@
package blackhole_test
import (
"context"
"testing"
"github.com/xtls/xray-core/common"
"github.com/xtls/xray-core/proxy/blackhole"
)
func TestHTTPResponse(t *testing.T) {
handler, err := blackhole.New(context.Background(), &blackhole.Config{
Response: &blackhole.Response{Type: "http"},
})
common.Must(err)
if handler == nil {
t.Error("expected HTTP response handler")
}
}
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: proxy/dns/config.proto
package dns
+7
View File
@@ -381,6 +381,13 @@ func (h *Handler) handleIPQuery(id uint16, qType dnsmessage.Type, domain string,
errors.LogInfoInner(context.Background(), err, "pack message")
b.Release()
timer.SetTimeout(0)
return
}
if len(msgBytes) > buf.Size {
b.Release()
timer.SetTimeout(0)
errors.LogError(context.Background(), "DNS response message too large")
return
}
b.Resize(0, int32(len(msgBytes)))
+24 -24
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: proxy/dokodemo/config.proto
package dokodemo
@@ -23,14 +23,14 @@ const (
)
type Config struct {
state protoimpl.MessageState `protogen:"open.v1"`
RewriteAddress *net.IPOrDomain `protobuf:"bytes,1,opt,name=rewrite_address,json=rewriteAddress,proto3" json:"rewrite_address,omitempty"`
RewritePort uint32 `protobuf:"varint,2,opt,name=rewrite_port,json=rewritePort,proto3" json:"rewrite_port,omitempty"`
PortMap map[string]string `protobuf:"bytes,3,rep,name=port_map,json=portMap,proto3" json:"port_map,omitempty" protobuf_key:"bytes,1,opt,name=key" protobuf_val:"bytes,2,opt,name=value"`
state protoimpl.MessageState `protogen:"open.v1"`
// List of networks that the Dokodemo accepts.
AllowedNetworks []net.Network `protobuf:"varint,7,rep,packed,name=allowed_networks,json=allowedNetworks,proto3,enum=xray.common.net.Network" json:"allowed_networks,omitempty"`
FollowRedirect bool `protobuf:"varint,5,opt,name=follow_redirect,json=followRedirect,proto3" json:"follow_redirect,omitempty"`
UserLevel uint32 `protobuf:"varint,6,opt,name=user_level,json=userLevel,proto3" json:"user_level,omitempty"`
AllowedNetworks []net.Network `protobuf:"varint,7,rep,packed,name=allowed_networks,json=allowedNetworks,proto3,enum=xray.common.net.Network" json:"allowed_networks,omitempty"`
RewriteAddress *net.IPOrDomain `protobuf:"bytes,1,opt,name=rewrite_address,json=rewriteAddress,proto3" json:"rewrite_address,omitempty"`
RewritePort uint32 `protobuf:"varint,2,opt,name=rewrite_port,json=rewritePort,proto3" json:"rewrite_port,omitempty"`
PortMap map[string]string `protobuf:"bytes,3,rep,name=port_map,json=portMap,proto3" json:"port_map,omitempty" protobuf_key:"bytes,1,opt,name=key" protobuf_val:"bytes,2,opt,name=value"`
FollowRedirect bool `protobuf:"varint,5,opt,name=follow_redirect,json=followRedirect,proto3" json:"follow_redirect,omitempty"`
UserLevel uint32 `protobuf:"varint,6,opt,name=user_level,json=userLevel,proto3" json:"user_level,omitempty"`
unknownFields protoimpl.UnknownFields
sizeCache protoimpl.SizeCache
}
@@ -65,6 +65,13 @@ func (*Config) Descriptor() ([]byte, []int) {
return file_proxy_dokodemo_config_proto_rawDescGZIP(), []int{0}
}
func (x *Config) GetAllowedNetworks() []net.Network {
if x != nil {
return x.AllowedNetworks
}
return nil
}
func (x *Config) GetRewriteAddress() *net.IPOrDomain {
if x != nil {
return x.RewriteAddress
@@ -86,13 +93,6 @@ func (x *Config) GetPortMap() map[string]string {
return nil
}
func (x *Config) GetAllowedNetworks() []net.Network {
if x != nil {
return x.AllowedNetworks
}
return nil
}
func (x *Config) GetFollowRedirect() bool {
if x != nil {
return x.FollowRedirect
@@ -112,11 +112,11 @@ var File_proxy_dokodemo_config_proto protoreflect.FileDescriptor
const file_proxy_dokodemo_config_proto_rawDesc = "" +
"\n" +
"\x1bproxy/dokodemo/config.proto\x12\x13xray.proxy.dokodemo\x1a\x18common/net/address.proto\x1a\x18common/net/network.proto\"\xff\x02\n" +
"\x06Config\x12D\n" +
"\x06Config\x12C\n" +
"\x10allowed_networks\x18\a \x03(\x0e2\x18.xray.common.net.NetworkR\x0fallowedNetworks\x12D\n" +
"\x0frewrite_address\x18\x01 \x01(\v2\x1b.xray.common.net.IPOrDomainR\x0erewriteAddress\x12!\n" +
"\frewrite_port\x18\x02 \x01(\rR\vrewritePort\x12C\n" +
"\bport_map\x18\x03 \x03(\v2(.xray.proxy.dokodemo.Config.PortMapEntryR\aportMap\x12C\n" +
"\x10allowed_networks\x18\a \x03(\x0e2\x18.xray.common.net.NetworkR\x0fallowedNetworks\x12'\n" +
"\bport_map\x18\x03 \x03(\v2(.xray.proxy.dokodemo.Config.PortMapEntryR\aportMap\x12'\n" +
"\x0ffollow_redirect\x18\x05 \x01(\bR\x0efollowRedirect\x12\x1d\n" +
"\n" +
"user_level\x18\x06 \x01(\rR\tuserLevel\x1a:\n" +
@@ -141,13 +141,13 @@ var file_proxy_dokodemo_config_proto_msgTypes = make([]protoimpl.MessageInfo, 2)
var file_proxy_dokodemo_config_proto_goTypes = []any{
(*Config)(nil), // 0: xray.proxy.dokodemo.Config
nil, // 1: xray.proxy.dokodemo.Config.PortMapEntry
(*net.IPOrDomain)(nil), // 2: xray.common.net.IPOrDomain
(net.Network)(0), // 3: xray.common.net.Network
(net.Network)(0), // 2: xray.common.net.Network
(*net.IPOrDomain)(nil), // 3: xray.common.net.IPOrDomain
}
var file_proxy_dokodemo_config_proto_depIdxs = []int32{
2, // 0: xray.proxy.dokodemo.Config.rewrite_address:type_name -> xray.common.net.IPOrDomain
1, // 1: xray.proxy.dokodemo.Config.port_map:type_name -> xray.proxy.dokodemo.Config.PortMapEntry
3, // 2: xray.proxy.dokodemo.Config.allowed_networks:type_name -> xray.common.net.Network
2, // 0: xray.proxy.dokodemo.Config.allowed_networks:type_name -> xray.common.net.Network
3, // 1: xray.proxy.dokodemo.Config.rewrite_address:type_name -> xray.common.net.IPOrDomain
1, // 2: xray.proxy.dokodemo.Config.port_map:type_name -> xray.proxy.dokodemo.Config.PortMapEntry
3, // [3:3] is the sub-list for method output_type
3, // [3:3] is the sub-list for method input_type
3, // [3:3] is the sub-list for extension type_name
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: proxy/freedom/config.proto
package freedom
+10 -5
View File
@@ -229,14 +229,19 @@ func (h *Handler) blockDelay(rule *FinalRule) time.Duration {
func (h *Handler) blackhole(ctx context.Context, input buf.Reader, output buf.Writer, rule *FinalRule, dest *net.Destination) error {
delay := h.blockDelay(rule)
errors.LogInfo(ctx, "blocked target: ", *dest, ", blackholing connection for ", delay)
timer := time.AfterFunc(delay, func() {
defer common.Close(output)
done := make(chan struct{})
go func() { // a DispatchLink inbound's reader ignores Interrupt, so don't wait for this copy
_ = buf.Copy(input, buf.Discard)
close(done)
}()
select {
case <-done:
case <-time.After(delay):
common.Interrupt(input)
common.Interrupt(output)
errors.LogInfo(ctx, "closed blackholed connection to blocked target: ", *dest)
})
defer timer.Stop()
defer common.Close(output)
_ = buf.Copy(input, buf.Discard)
}
return nil
}
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: proxy/http/config.proto
package http
+3 -2
View File
@@ -312,8 +312,9 @@ func (s *Server) handlePlainHTTP(ctx context.Context, request *http.Request, wri
// Sometimes, server might send 1xx response to client
// it should not be processed by http proxy handler, just forward it to client
func readResponseAndHandle100Continue(r *bufio.Reader, req *http.Request, writer io.Writer) (*http.Response, error) {
// have a little look of response
peekBytes, err := r.Peek(56)
// Wait for the HTTP/1.x status prefix before inspecting the buffered response.
r.Peek(12)
peekBytes, err := r.Peek(min(56, r.Buffered()))
if err == nil || err == bufio.ErrBufferFull {
str := string(peekBytes)
ResponseLine := strings.Split(str, "\r\n")[0]
+2 -1
View File
@@ -7,6 +7,7 @@ import (
"net/http"
"strings"
"testing"
"testing/iotest"
)
// A malformed upstream response containing a bare '\n' before the real
@@ -29,7 +30,7 @@ func TestReadResponseAndHandle100ContinueDoesNotPanicOnEarlyNewline(t *testing.T
func TestReadResponseAndHandle100ContinueForwardsAndParsesFinalResponse(t *testing.T) {
payload := "HTTP/1.1 100 Continue\r\n\r\n" +
"HTTP/1.1 200 OK\r\nContent-Length: 5\r\n\r\nhello"
r := bufio.NewReader(bytes.NewReader([]byte(payload)))
r := bufio.NewReader(iotest.OneByteReader(bytes.NewReader([]byte(payload))))
req, err := http.NewRequest("GET", "http://example.com/", nil)
if err != nil {
t.Fatal(err)
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: proxy/hysteria/account/config.proto
package account
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: proxy/hysteria/config.proto
package hysteria
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: proxy/loopback/config.proto
package loopback
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: proxy/masque/config.proto
package masque
-123
View File
@@ -1,123 +0,0 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// source: proxy/responder/config.proto
package responder
import (
protoreflect "google.golang.org/protobuf/reflect/protoreflect"
protoimpl "google.golang.org/protobuf/runtime/protoimpl"
reflect "reflect"
sync "sync"
unsafe "unsafe"
)
const (
// Verify that this generated code is sufficiently up-to-date.
_ = protoimpl.EnforceVersion(20 - protoimpl.MinVersion)
// Verify that runtime/protoimpl is sufficiently up-to-date.
_ = protoimpl.EnforceVersion(protoimpl.MaxVersion - 20)
)
type Config struct {
state protoimpl.MessageState `protogen:"open.v1"`
Response []byte `protobuf:"bytes,1,opt,name=response,proto3" json:"response,omitempty"`
unknownFields protoimpl.UnknownFields
sizeCache protoimpl.SizeCache
}
func (x *Config) Reset() {
*x = Config{}
mi := &file_proxy_responder_config_proto_msgTypes[0]
ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
ms.StoreMessageInfo(mi)
}
func (x *Config) String() string {
return protoimpl.X.MessageStringOf(x)
}
func (*Config) ProtoMessage() {}
func (x *Config) ProtoReflect() protoreflect.Message {
mi := &file_proxy_responder_config_proto_msgTypes[0]
if x != nil {
ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
if ms.LoadMessageInfo() == nil {
ms.StoreMessageInfo(mi)
}
return ms
}
return mi.MessageOf(x)
}
// Deprecated: Use Config.ProtoReflect.Descriptor instead.
func (*Config) Descriptor() ([]byte, []int) {
return file_proxy_responder_config_proto_rawDescGZIP(), []int{0}
}
func (x *Config) GetResponse() []byte {
if x != nil {
return x.Response
}
return nil
}
var File_proxy_responder_config_proto protoreflect.FileDescriptor
const file_proxy_responder_config_proto_rawDesc = "" +
"\n" +
"\x1cproxy/responder/config.proto\x12\x14xray.proxy.responder\"$\n" +
"\x06Config\x12\x1a\n" +
"\bresponse\x18\x01 \x01(\fR\bresponseB^\n" +
"\x18com.xray.proxy.responderP\x01Z)github.com/xtls/xray-core/proxy/responder\xaa\x02\x14Xray.Proxy.Responderb\x06proto3"
var (
file_proxy_responder_config_proto_rawDescOnce sync.Once
file_proxy_responder_config_proto_rawDescData []byte
)
func file_proxy_responder_config_proto_rawDescGZIP() []byte {
file_proxy_responder_config_proto_rawDescOnce.Do(func() {
file_proxy_responder_config_proto_rawDescData = protoimpl.X.CompressGZIP(unsafe.Slice(unsafe.StringData(file_proxy_responder_config_proto_rawDesc), len(file_proxy_responder_config_proto_rawDesc)))
})
return file_proxy_responder_config_proto_rawDescData
}
var file_proxy_responder_config_proto_msgTypes = make([]protoimpl.MessageInfo, 1)
var file_proxy_responder_config_proto_goTypes = []any{
(*Config)(nil), // 0: xray.proxy.responder.Config
}
var file_proxy_responder_config_proto_depIdxs = []int32{
0, // [0:0] is the sub-list for method output_type
0, // [0:0] is the sub-list for method input_type
0, // [0:0] is the sub-list for extension type_name
0, // [0:0] is the sub-list for extension extendee
0, // [0:0] is the sub-list for field type_name
}
func init() { file_proxy_responder_config_proto_init() }
func file_proxy_responder_config_proto_init() {
if File_proxy_responder_config_proto != nil {
return
}
type x struct{}
out := protoimpl.TypeBuilder{
File: protoimpl.DescBuilder{
GoPackagePath: reflect.TypeOf(x{}).PkgPath(),
RawDescriptor: unsafe.Slice(unsafe.StringData(file_proxy_responder_config_proto_rawDesc), len(file_proxy_responder_config_proto_rawDesc)),
NumEnums: 0,
NumMessages: 1,
NumExtensions: 0,
NumServices: 0,
},
GoTypes: file_proxy_responder_config_proto_goTypes,
DependencyIndexes: file_proxy_responder_config_proto_depIdxs,
MessageInfos: file_proxy_responder_config_proto_msgTypes,
}.Build()
File_proxy_responder_config_proto = out.File
file_proxy_responder_config_proto_goTypes = nil
file_proxy_responder_config_proto_depIdxs = nil
}
-11
View File
@@ -1,11 +0,0 @@
syntax = "proto3";
package xray.proxy.responder;
option csharp_namespace = "Xray.Proxy.Responder";
option go_package = "github.com/xtls/xray-core/proxy/responder";
option java_package = "com.xray.proxy.responder";
option java_multiple_files = true;
message Config {
bytes response = 1;
}
-34
View File
@@ -1,34 +0,0 @@
package responder
import (
"context"
"github.com/xtls/xray-core/common"
"github.com/xtls/xray-core/common/buf"
"github.com/xtls/xray-core/common/session"
"github.com/xtls/xray-core/transport"
"github.com/xtls/xray-core/transport/internet"
)
type Handler struct {
response []byte
}
func New(_ context.Context, config *Config) (*Handler, error) {
return &Handler{response: config.Response}, nil
}
// Process implements proxy.Outbound.
func (h *Handler) Process(ctx context.Context, link *transport.Link, _ internet.Dialer) error {
outbounds := session.OutboundsFromContext(ctx)
ob := outbounds[len(outbounds)-1]
ob.Name = "responder"
return link.Writer.WriteMultiBuffer(buf.MergeBytes(nil, h.response))
}
func init() {
common.Must(common.RegisterConfig((*Config)(nil), func(ctx context.Context, config interface{}) (interface{}, error) {
return New(ctx, config.(*Config))
}))
}
-187
View File
@@ -1,187 +0,0 @@
package responder_test
import (
"bytes"
"context"
"errors"
"io"
"strconv"
"testing"
"time"
"github.com/xtls/xray-core/app/proxyman"
_ "github.com/xtls/xray-core/app/proxyman/outbound"
"github.com/xtls/xray-core/common/buf"
"github.com/xtls/xray-core/common/net"
"github.com/xtls/xray-core/common/serial"
"github.com/xtls/xray-core/common/session"
"github.com/xtls/xray-core/core"
"github.com/xtls/xray-core/features/outbound"
"github.com/xtls/xray-core/proxy/responder"
"github.com/xtls/xray-core/transport"
"github.com/xtls/xray-core/transport/pipe"
)
type writerFunc func(buf.MultiBuffer) error
func (f writerFunc) WriteMultiBuffer(mb buf.MultiBuffer) error {
return f(mb)
}
func newHandler(t *testing.T, response []byte) *responder.Handler {
t.Helper()
handler, err := responder.New(context.Background(), &responder.Config{Response: response})
if err != nil {
t.Fatal(err)
}
return handler
}
func responseContext(network net.Network) context.Context {
return session.ContextWithOutbounds(context.Background(), []*session.Outbound{{
Target: net.Destination{Network: network, Address: net.DomainAddress("responder.invalid"), Port: 80},
}})
}
func TestResponderResponse(t *testing.T) {
tests := []struct {
name string
response []byte
}{
{name: "empty"},
{name: "binary", response: []byte{0, 255, 128, 1}},
{name: "large", response: bytes.Repeat([]byte("response\x00\xff"), buf.Size)},
}
for _, test := range tests {
t.Run(test.name, func(t *testing.T) {
handler := newHandler(t, test.response)
want := string(test.response)
for _, network := range []net.Network{net.Network_TCP, net.Network_UDP} {
t.Run(network.String(), func(t *testing.T) {
for range 2 {
var output buf.MultiBufferContainer
writes := 0
writer := writerFunc(func(mb buf.MultiBuffer) error {
writes++
return output.WriteMultiBuffer(mb)
})
ctx := responseContext(network)
// No reader or dialer: the handler must respond without using either.
if err := handler.Process(ctx, &transport.Link{Writer: writer}, nil); err != nil {
t.Fatal(err)
}
if writes != 1 || output.MultiBuffer.String() != want {
t.Fatalf("writes = %d, response length = %d, want one write of %d bytes", writes, output.MultiBuffer.Len(), len(want))
}
if got := session.OutboundsFromContext(ctx)[0].Name; got != "responder" {
t.Fatalf("outbound name = %q, want responder", got)
}
if len(output.MultiBuffer) > 0 {
output.MultiBuffer[0].Bytes()[0] ^= 0xff
}
output.Close()
if string(test.response) != want {
t.Fatal("sending or modifying the response changed the configured payload")
}
}
})
}
})
}
}
func TestResponderConcurrent(t *testing.T) {
response := bytes.Repeat([]byte("concurrent response\x00\xff"), buf.Size)
want := string(response)
handler := newHandler(t, response)
for i := range 8 {
t.Run(strconv.Itoa(i), func(t *testing.T) {
t.Parallel()
var output buf.MultiBufferContainer
defer output.Close()
if err := handler.Process(responseContext(net.Network_TCP), &transport.Link{Writer: &output}, nil); err != nil {
t.Fatal(err)
}
if output.MultiBuffer.String() != want {
t.Fatal("concurrent response mismatch")
}
output.MultiBuffer[0].Bytes()[0] ^= 0xff
})
}
}
func TestResponderWriteError(t *testing.T) {
handler := newHandler(t, []byte("response"))
want := errors.New("write failed")
writer := writerFunc(func(mb buf.MultiBuffer) error {
buf.ReleaseMulti(mb)
return want
})
if err := handler.Process(responseContext(net.Network_TCP), &transport.Link{Writer: writer}, nil); !errors.Is(err, want) {
t.Fatalf("Process returned %v, want %v", err, want)
}
}
func TestResponderDispatch(t *testing.T) {
for _, response := range [][]byte{nil, bytes.Repeat([]byte("response\x00\xff"), buf.Size)} {
name := "large"
if len(response) == 0 {
name = "empty"
}
t.Run(name, func(t *testing.T) {
instance, err := core.New(&core.Config{
App: []*serial.TypedMessage{serial.ToTypedMessage(&proxyman.OutboundConfig{})},
Outbound: []*core.OutboundHandlerConfig{{
Tag: "reply",
ProxySettings: serial.ToTypedMessage(&responder.Config{Response: response}),
}},
})
if err != nil {
t.Fatal(err)
}
defer instance.Close()
manager := instance.GetFeature(outbound.ManagerType()).(outbound.Manager)
handler := manager.GetHandler("reply")
if handler == nil {
t.Fatal("responder handler not registered")
}
for _, network := range []net.Network{net.Network_TCP, net.Network_UDP} {
t.Run(network.String(), func(t *testing.T) {
input, upload := pipe.New()
output, download := pipe.New(pipe.WithoutSizeLimit())
defer input.Interrupt()
defer output.Interrupt()
done := make(chan struct{})
go func() {
handler.Dispatch(responseContext(network), &transport.Link{Reader: input, Writer: download})
close(done)
}()
select {
case <-done:
case <-time.After(5 * time.Second):
t.Fatal("responder did not finish without incoming data")
}
// Read after Dispatch returns: normal closure must preserve queued data.
var actual []byte
for {
mb, err := output.ReadMultiBufferTimeout(time.Second)
actual = append(actual, []byte(mb.String())...)
buf.ReleaseMulti(mb)
if err == io.EOF {
break
}
if err != nil {
t.Fatal(err)
}
}
if !bytes.Equal(actual, response) {
t.Fatalf("response mismatch: got %d bytes, want %d", len(actual), len(response))
}
if err := upload.WriteMultiBuffer(buf.MergeBytes(nil, []byte("late request"))); err != io.ErrClosedPipe {
t.Fatalf("input was not interrupted: got %v, want %v", err, io.ErrClosedPipe)
}
})
}
})
}
}
+2 -2
View File
@@ -1,7 +1,7 @@
// Code generated by protoc-gen-go. DO NOT EDIT.
// versions:
// protoc-gen-go v1.36.11
// protoc v6.33.5
// protoc-gen-go v1.36.12
// protoc (unknown)
// source: proxy/shadowsocks/config.proto
package shadowsocks

Some files were not shown because too many files have changed in this diff Show More